OpenMandriva 5.0 for aarch64 : / usr /share /kicad /3dmodels /TestPoint.3dshapes

• TestPoint_Bridge_Pitch2.0mm_Drill0.7mm.step
• TestPoint_Bridge_Pitch2.0mm_Drill0.7mm.wrl
• TestPoint_Bridge_Pitch2.54mm_Drill0.7mm.step
• TestPoint_Bridge_Pitch2.54mm_Drill0.7mm.wrl
• TestPoint_Bridge_Pitch2.54mm_Drill1.0mm.step
• TestPoint_Bridge_Pitch2.54mm_Drill1.0mm.wrl
• TestPoint_Bridge_Pitch2.54mm_Drill1.3mm.step
• TestPoint_Bridge_Pitch2.54mm_Drill1.3mm.wrl
• TestPoint_Bridge_Pitch3.81mm_Drill1.3mm.step
• TestPoint_Bridge_Pitch3.81mm_Drill1.3mm.wrl
• TestPoint_Bridge_Pitch5.08mm_Drill0.7mm.step
• TestPoint_Bridge_Pitch5.08mm_Drill0.7mm.wrl
• TestPoint_Bridge_Pitch5.08mm_Drill1.3mm.step
• TestPoint_Bridge_Pitch5.08mm_Drill1.3mm.wrl
• TestPoint_Bridge_Pitch6.35mm_Drill1.3mm.step
• TestPoint_Bridge_Pitch6.35mm_Drill1.3mm.wrl
• TestPoint_Bridge_Pitch7.62mm_Drill1.3mm.step
• TestPoint_Bridge_Pitch7.62mm_Drill1.3mm.wrl
• TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded.step
• TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded.wrl
• TestPoint_Loop_D2.50mm_Drill1.0mm.step
• TestPoint_Loop_D2.50mm_Drill1.0mm.wrl
• TestPoint_Loop_D2.50mm_Drill1.0mm_LowProfile.step
• TestPoint_Loop_D2.50mm_Drill1.0mm_LowProfile.wrl
• TestPoint_Loop_D2.50mm_Drill1.85mm.step
• TestPoint_Loop_D2.50mm_Drill1.85mm.wrl
• TestPoint_Loop_D2.54mm_Drill1.5mm_Beaded.step
• TestPoint_Loop_D2.54mm_Drill1.5mm_Beaded.wrl
• TestPoint_Loop_D2.60mm_Drill0.9mm_Beaded.step
• TestPoint_Loop_D2.60mm_Drill0.9mm_Beaded.wrl
• TestPoint_Loop_D2.60mm_Drill1.4mm_Beaded.step
• TestPoint_Loop_D2.60mm_Drill1.4mm_Beaded.wrl
• TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded.step
• TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded.wrl
• TestPoint_Loop_D3.50mm_Drill0.9mm_Beaded.step
• TestPoint_Loop_D3.50mm_Drill0.9mm_Beaded.wrl
• TestPoint_Loop_D3.50mm_Drill1.4mm_Beaded.step
• TestPoint_Loop_D3.50mm_Drill1.4mm_Beaded.wrl
• TestPoint_Loop_D3.80mm_Drill2.0mm.step
• TestPoint_Loop_D3.80mm_Drill2.0mm.wrl
• TestPoint_Loop_D3.80mm_Drill2.5mm.step
• TestPoint_Loop_D3.80mm_Drill2.5mm.wrl
• TestPoint_Loop_D3.80mm_Drill2.8mm.step
• TestPoint_Loop_D3.80mm_Drill2.8mm.wrl

Generated by rpm2html 1.8.1

Fabrice Bellet, Tue Oct 8 23:25:21 2024