stm32flash-0.7-1.6 RPM for aarch64

From OpenSuSE Ports Tumbleweed for aarch64

Open source flash program for the STM32 ARM processors using the ST
serial bootloader over UART or I2C.

Features:
- UART and I2C transports supported
- device identification
- write to flash/ram
- read from flash/ram
- auto-detect Intel HEX or raw binary input format with option to force
  binary
- flash from binary file
- save flash to binary file
- verify & retry up to N times on failed writes
- start execution at specified address
- software reset the device when finished if -R is specified
- resume already initialized connection (for when reset fails, UART only)
- GPIO signalling to enter bootloader mode (hardware dependent)

Provides

• stm32flash
• stm32flash(aarch-64)

Requires

• ld-linux-aarch64.so.1()(64bit)
• ld-linux-aarch64.so.1(GLIBC_2.17)(64bit)
• libc.so.6()(64bit)
• libc.so.6(GLIBC_2.17)(64bit)
• libc.so.6(GLIBC_2.33)(64bit)
• libc.so.6(GLIBC_2.34)(64bit)
• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsZstd) <= 5.4.18-1

License

GPL-2.0-or-later

Changelog

* Mon Feb 13 2023 Torsten Gruner <simmphonie@opensuse.org>
  - update to 0.7
    * Fix I2C page-by-page erase (Yann Sionneau)
    * Fix hex file base address not used, extraneous base padding (Renaud Fivet)
    * Fix truncated read from stdin (Renaud Fivet)
    * Fix input buffer flush on Windows (Jan Belohoubek)
    * More baud rates available, up to 4000000
    * Allow skipping serial port setup with -b 0
    * Support STM32L412xx/422xx (Andy Little)
    * Support STM32G05xxx/061xx (Luca Amati), STM32G0B0/B1/C1xx, STM32G491xx/A1xx
  - drop stm32flash-i2c-tools-headers-clash.patch
* Wed May 12 2021 Dirk Müller <dmueller@suse.com>
  - update to 0.6:
    * Many more devices supported G0/G4/F7/H7/L4
    * GPIO sequencing reworked
    * Serial port handling improved
    * Many code improvements
    * Only erase needed pages if flashing from file
  - drop 0001-Fix-for-device-0x442-System-memory-start-address.patch,
    0003-dev_table-Mark-0x417-0x429-0x427-for-no-mass-erase.patch: upstream
* Sat Aug 13 2016 kkaempf@suse.com
  - add upstream fixes
    * Fix for device 0x442: System memory start address:
      0001-Fix-for-device-0x442-System-memory-start-address.patch
    * dev_table: Mark 0x417, 0x429, 0x427 for no mass-erase
      0003-dev_table-Mark-0x417-0x429-0x427-for-no-mass-erase.patch
* Sat Aug 13 2016 kkaempf@suse.com
  - Update to 0.5
    * support for multiple bank sizes
    * improved serial port support on Windows
    * improved erase functionality
    * improved hex parser
    * many new devices and device info corrections
* Wed Oct 14 2015 dmitry_r@opensuse.org
  - Restore i2c patch for released openSUSE versions (boo#952646)
* Wed Oct 14 2015 dvaleev@suse.com
  - Drop stm32flash-i2c-tools-headers-clash.patch fixed in i2c-tools
* Fri Jun 05 2015 sbrabec@suse.cz
  - New package, version 0.4.
  - Fix i2c headers clash (stm32flash-i2c-tools-headers-clash.patch).

Files

/usr/bin/stm32flash
/usr/share/doc/packages/stm32flash
/usr/share/doc/packages/stm32flash/HOWTO
/usr/share/doc/packages/stm32flash/I2C.txt
/usr/share/doc/packages/stm32flash/TODO
/usr/share/doc/packages/stm32flash/protocol.txt
/usr/share/licenses/stm32flash
/usr/share/licenses/stm32flash/gpl-2.0.txt
/usr/share/man/man1/stm32flash.1.gz

Generated by rpm2html 1.8.1

Fabrice Bellet, Wed Nov 13 00:50:56 2024