Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

osmo-bts-virtual-1.2.0-lp152.1.1 RPM for aarch64

From OpenSuSE Ports Leap 15.2 for aarch64

Name: osmo-bts-virtual Distribution: openSUSE Leap 15.2
Version: 1.2.0 Vendor: openSUSE
Release: lp152.1.1 Build date: Fri Jan 17 12:42:52 2020
Group: Productivity/Telephony/Utilities Build host: obs-arm-8
Size: 339154 Source RPM: osmo-bts-1.2.0-lp152.1.1.src.rpm
Packager: https://bugs.opensuse.org
Url: https://osmocom.org/projects/osmobts/wiki/Wiki
Summary: Virtual Osmocom GSM BTS (no RF hardware; GSMTAP/UDP)
This version of OsmoBTS doesn't use actual GSM PHY/Hardware/RF, but
utilizes GSMTAP-over-UDP frames for the Um interface.  This is useful
in fully virtualized setups e.g. in combination with OsmocomBB virt_phy.

Provides

Requires

License

GPL-2.0-or-later

Changelog

* Sun Jan 05 2020 Martin Hauke <mardnh@gmx.de>
  - Update to new upstream release 1.2.0
    * Introduce BTS feature BTS_FEAT_MS_PWR_CTRL_DSP
    * Rename variable: CALIB_SUCESS -> CALIB_SUCCESS
    * ETWS Primary Notification via P1 Rest Octets
  - Update to new upstream release 1.1.0
    * bts-trx: Introduce VTY command osmotrx trxd-max-version
    * bts-trx: trx_if.c: Introduce logging macro LOGPPHI
    * rsl: Implement parsing of BS Power Control message
    * cbch: Support Extended CBCH
    * Enable statsd support
* Sun Mar 31 2019 Martin Hauke <mardnh@gmx.de>
  - Actually do the version bump to version 1.0.1
    * spec and tarball wasn't updated in the last SR (only the
      .changes file
* Wed Mar 27 2019 Martin Hauke <mardnh@gmx.de>
  - Update to new upstream release 1.0.1
    * rsl.c: Add missing #include of gsm0808.h
* Tue Jan 29 2019 mardnh@gmx.de
  - Update to new upstream release 1.0.0
    * various correctness fixes related to advanced SACCH FILL
      scenarios with different SI5/SI6 per channel/subscriber
    * various fixes to bit-rotten CBCH support; related generalization
    * CBCH support for osmo-bts-trx
    * extend precision of TOA mesaurement reports to 1/256 symbol duration
    * make RTP port range configurable
    * extensive fixes on correctness of computed + reported
      measurement reports
    * Fix build against gpsd >= 3.18
    * Allocate TRX for BTS dynamically, deprecate "-t" command line option
    * Initial support for OpenCellular OC-2G BTS model/PHY
    * Full changelogs since 0.7.0:
      http://git.osmocom.org/osmo-bts/plain/debian/changelog?h=1.0.0
      http://git.osmocom.org/osmo-bts/plain/debian/changelog?h=0.8.1
      http://git.osmocom.org/osmo-bts/plain/debian/changelog?h=0.8.0
  - Remove not longer needed patches:
    * osmo-bts-fix-cflags.patch
    * 0001-l1sap-fix-wrong-return-value-of-is_fill_frame.patch
* Sat Mar 17 2018 mardnh@gmx.de
  - Show testsuite.log when tests are failing
* Mon Jan 01 2018 jengelh@inai.de
  - Remove unnecessary sysvinit script macros.
* Fri Dec 29 2017 mardnh@gmx.de
  - Remove handcrafted CFLAGS
  - Add patch:
    * 0001-l1sap-fix-wrong-return-value-of-is_fill_frame.patch
* Wed Dec 27 2017 mardnh@gmx.de
  - Update to new upstream release 0.7.0
    * No changelog was provided
  - Specfile cleanup
  - Add patch
    * osmo-bts-fix-cflags.patch
* Wed Feb 15 2017 mardnh@gmx.de
  - Update to version 0.4.0.git1487093487.6b4c6aa:
    * Log socket path on error
    * Add Abis OML failure event reporting
    * Alarm on various errors
    * RSL: drop obsolete NULL check
    * RSL: add assertions to check args of public API
    * OML: fix possible segfault: add NULL check in oml_ipa_set_attr()
    * CTRL: make the CTRL-Interface IP address configurable
    * Remove obsolete define TLVP_PRES_LEN
    * DTX: fix SID-FIRST detection
    * scheduler: log lchan on which prim error occured
    * lc15,sysmobts l1_if: fix memleak in handle_mph_time_ind()
    * l1sap: Fix expired rach slot counting
    * l1sap: fix missing 'else's causing wrong rach frame expiry counts
    * deb: use gsm_data_shared.* from openbsc-dev
    * octphy: set tx attenuation via VTY
    * Revert "deb: use gsm_data_shared.* from openbsc-dev"
    * debian: Use the header files installed by openbsc-dev
    * build: Do not require more headers from OpenBSC
    * OML: internalize failure reporting
    * Add ctrl command to send OML alert
    * octphy VTY: fix vty write output for octphy's phy section
    * cosmetic: Remove stray newlines in octphy_vty.c
    * sysmo,lc15: fix memory leak at each call placed
    * cosmetic: remove stray newline in octphy's l1_oml.c
    * DTX: fix "unexpected burst" error
    * rsl: Fix dropping of LAPDm UA message.
    * Fix AMR HR DTX FSM logic.
    * octphy: Improve OML ADM state handling
    * sysmobts: Add correct nominal transmit power for sysmoBTS 1020
    * sysmobts_eeprom.h: Fix/extend model number definitions
    * Fix SACCH channel release indication not sent to BSC after location update.
    * Revert "sysmobts: Add correct nominal transmit power for sysmoBTS 1020"
    * tx_power: various cosmetic fixes in comments
    * tx_power: Change PA calibration tables to use delta vales
    * Add new unit-test for transmit power computation code
    * fix missing ~ in bit logic for lchan->si.valid in rsl_rx_sacch_inf_mod()
    * SACCH: fix sending of SI with an enum value > 7
    * SACCH SI: assert that SI enum vals fit in bit mask
    * all models: fix vty write: bts_model_config_write_phy
    * cosmetic: lchan_sacch_get: early-exit instead of nested-if
    * rsl: Output RTP stats before closing the socket.
    * osmo-trx-bts: Fix incorrect setting of RXGAIN and POWER parameters on second channel (TRX1) of osmo-trx
    * osmo-trx-bts: Fix osmo-bts-trx crash on startup during reading phy instance parameters from config file
    * Fix typo in TCH/H interleaving table
    * osmo-trx-bts: Fix incorrect bts shutdown procedure in case of abis connection closure
    * sysmobts: fully support trx_power_params
* Fri Jan 06 2017 mardnh@gmx.de
  - Update to version 0.4.0.git1483701882.2cf6b73:
    * Move code to libosmocore
* Fri Jan 06 2017 mardnh@gmx.de
  - Update to version 0.4.0.git1483698786.f376359:
    * DTX AMR HR: fix inhibition
    * fix: dyn ts: uplink measurement report
    * Add copyright for .deb packages
  - run tests after the build
* Sun Dec 25 2016 mardnh@gmx.de
  - Update to version 0.4.0.git1482415865.c2ecca6:
    * DTX: move scheduling check inside repeat_last_sid
    * DTX: further AMR SID cache fixes (lc15, sysmo)
    * DTX: move ONSET detection into separate function
    * DTX: send AMR voice alongside with ONSET
    * build: be robust against install-sh files above the root dir
    * configure: check for pkg-config presence
    * octphy: reintroducing multi-trx support
    * octopy: fixing renamed constant
    * DTX: fix 1st RTP packet drop
    * DTX: fix conversion from fn to ms
    * Move copy-pasted array into shared header
    * octphy: prevent mismatch between dsp-firmware and octphy headers
    * rsl: improving the log output
    * jenkins.sh: use osmo-build-dep.sh, log test failures
    * DTX DL: use FSM for AMR
    * TRX: fix building with latest DTX changes
    * DTX: fix array size calculation
    * msgb ctx: use new msgb_talloc_ctx_init() in various main()s
    * DTX AMR - fix buffer length check
    * Replace magic number with define
    * Fix lc15 build
    * jenkins-oct.sh: fix build: typo in deps path
    * Extend RTP RX callback parameters
    * DTX HR - fix array size calculation
    * Fix DTX DL AMR SIDscheduling logic
    * Add tools to check DTX operation
    * 11bit RACH support for osmo-bts-litecell15
    * DTX DL: split ONSET state handling
    * Remove obsolete define
    * DTX DL: add AMR HR support to scheduling check
    * DTX fix ONSET handling
    * Initialize parameters in osmo-trx for 11bit RACH
    * dtx_check.gawk: Fix false-positives in DTX check
    * Fix tests linking with libosmocodec
    * DTX DL: tighten check for enabled operation
    * DTX: wrap FSM signal dispatching
    * Add libosmocodec for octphy build
    * dtx_check.gawk: add check for repetitive SID FIRST
    * fix 'osmo-bts-* --version' segfault
    * Remove duplicated code
    * Replace link_id constant with define
    * l1sap: Fix use-after-free in loopback mode.
    * vty: Add commands to manually activate/deactivate a channel.
    * cosmetic: tweak README
    * vty: Ensure to not use negative (error) sapi value
    * octphy: multi-trx support: fix AC_CHECK order
    * osmo-bts-trx: remove obsolete include of netif/rtp.h
    * add jenkins_bts_trx.sh
    * add jenkins_oct_and_bts_trx.sh
    * jenkins: add jenkins_bts_model.sh
    * trx: Add "maxdlynb" VTY command to control max TA for Normal Bursts.
    * DTX DL AMR: rewrite FSM recursion
    * Remove duplicated code
    * cosmetic: vty prompts: add space after '#'
    * Fix AGCH/PCH proportional allocation
    * bursts test: test_pdtch: pre-init result mem
    * TRX: prevent segfault upon phy init
    * DTX: add explicit check if DTX enabled
    * Save RTP metadata in Control Buffer
    * osmo-bts-trx: fix lchan deactivation
    * DTX: fix TS adjustment for ONSET
    * Optionally use adaptive RTP jitter buffering
    * DTX: don't always perform AMR HR specific check
    * Fix some spelling errors
    * Integrate Debian packaging changes
* Sun Oct 02 2016 mardnh@gmx.de
  - Update to version 0.4.0.git1475228189.94fa252:
    * doc: move dyn_pdch.msc to osmo-gsm-manuals.git
    * error log: rsl.c: typo x2
    * info log: l1sap.c: add '0x' to hex output
    * fix compiler warning: msg_utils.c: fn_chk() constify arg
    * cosmetic: pcu_sock.c: rename ts_is_pdch() to ts_should_be_pdch()
    * cosmetic: clarify TCH/F_PDCH related naming and comments
    * dyn PDCH: code dup: use conf_lchans_as_pchan()
    * prepare dyn TS: split/replace conf_lchans_for_pchan()
    * trx: Add EGPRS tables, sequences, and mappings
    * code dup: join [rsl_]lchan_lookup() from libbsc and osmo-bts
    * dyn TS: common TCH/F_TCH/H_PDCH implementation
    * sysmo/oml.c: rename ts_connect() to ts_opstart()
    * dyn TS: implement SysmoBTS specifics
    * lc15/oml.c: rename ts_connect() to ts_opstart()
    * dyn TS: implement litecell15 specifics
    * comment typo: common/l1sap.c
    * log typo: trx_sched_set_pchan()
    * dyn TS: sysmo,lc15: chan_nr_by_sapi(): add missing assertion
    * trx: Add EGPRS coding and decoding procedures
    * trx: Enable EGPRS handling through burst lengths
    * Activate PTCCH UL
    * fix comment in common/l1sap.c, function name changed
    * pcu_sock: use osmo_sock_unix_init() from libosmocore
    * Fix dsp tracing at phy config
    * octphy: fix build
    * dyn TS, dyn PDCH: common/l1sap.c: properly notice PDCH
    * dyn PDCH: trx l1_if.c: factor out trx_set_ts_as_pchan() from trx_set_ts()
    * dyn PDCH: complete for trx: implement bts_model_ts_[dis]connect()
    * dyn PDCH: trx l1_if.c: drop fixme, add comment
    * trx: Fix coverity BER calculation NULL dereference
    * Add .mailmap for mapping mail addresses in shortlog
    * ci/spatch: Remove the "static" analysis handling
    * Fill measurements data for L1SAP
    * osmo-bts-trx: Fix PCS1900 operation
    * osmo-bts-trx: log decoder bit errors as DEBUG, not NOTICE
    * dyn TS: complete for TRX
    * dyn TS: measurement.c: replace fixme with comment
    * sysmo,lc15: ts_connect_as(): log error also for pchan_as == TCH/F_PDCH
    * sysmo: fix dyn TS: Revert "Activate PTCCH UL" [in sysmobts]
    * sysmo: ts_connect: log channel combination name instead of number
    * Change interface in osmo-bts for 11 bit RACH
    * log: l1sap: add 0x to hex output of chan_nr, 5 times
    * dyn TS: measurement: use correct nr of subslots, rm code dup
    * cosmetic: common ts_is_pdch()
    * dyn TS: sysmo,lc15: ph_data_req: fix PDCH mode detection
    * Fix ip.access style dyn PDCH, broken in 37af36e85eca546595081246aec010fa7f6fd0be
    * common/rsl: move decision whether to chan act ack/nack to common function
    * oct: Attempt to enable the Octphy for the osmo-bts-oct build
    * octphy: fix build: Revert "octphy: fix for multiple trx with more than 1 dsp"
    * octphy: fix build: Revert "octphy: add support for multiple trx ids"
    * octphy: fix build with OCTSDR-OPENBSC-02.07.00-B708: name changed
    * dyn TS: if PCU is not connected, allow operation as TCH
    * Update parameters in osmo-bts-sysmo for 11bit RACH
    * log: sysmo,lc15: tweak log about sapi_cmds queue
    * log causing rx event for lchan_lookup errors
    * heed VTY 'line vty'/'bind' command
    * DTX: fix last SID saving
    * DTX: fix SID repeat scheduling
    * DTX: fix SID logic
    * lc15, sysmo: Use SID_FIRST_P1 to initiate DTX
    * octphy: Fixing missing payload type in ph. chan. activation
    * octphy: Fixing band selection for ARFCN 0
    * sysmobts_mgr, lc15bts_mgr: fix tall context for telnet vty
    * DTX: check Marker bit to send ONSET to L1
    * DTX: remove misleading comment
    * LC15: Clarify msgb ownership / fix memory leaks
* Sun Jul 17 2016 mardnh@gmx.de
  - Update to version 0.4.0.git1468702853.4355021:
    * Fix ocmo-bts-octphy interaction with OsmoPCU
    * pcuif: Do not bump the PCU_IF version
    * octphy: Use the event defaults as base
    * Fix copy-paste issue
    * Update configuration examples
    * misc: Attempt to fix make distcheck and dumping docs
    * octphy: Enable TCH/H mode and begin testing
    * Fix SI2ter scheduling
    * Add explicit check for SI2quater index and count
    * Ignore binary and backup files
    * Add utility to check proper scheduling of SI
    * octphy: add missing include to fix the build
    * Fix typo in error message
    * octphy: use octasic's routines for debug output
    * octphy: add support for multiple trx ids
    * octphy: add example configuration with 2 trx
    * octphy: fix for multiple trx with more than 1 dsp
    * LC15: ignore build byproducts
    * LC15: add stubs for phy link/instance defaults
    * LC15: properly initialize unmapped phy instances
    * debian: Create initial packaging for the osmo-bts-trx
    * misc: Ignore files generated by a debian packaging build
    * jenkins: Add the build script from jenkins here
    * jenkins: Add the build script from jenkins here
    * Ensure TRX invariant
    * octphy: Update outdated config param name in error message.
    * Use libosmocore function for uplink measurements
    * Fix debug output
    * Fix RTP timestamps in case of DTX
    * Add DTXd support for sysmoBTS and LC15
    * Use libosmocodec for AMR RTP
    * octphy: Use the app. info. defaults as base
    * Close TRX session before opening new one
    * Fix debug output
    * DTXd: store/repeat last SID
    * DTXd: store/repeat last SID
    * DTXu: mark beginning of speech burst in RTP
    * l1sap.h: fix wrong L1SAP_FN2PTCCHBLOCK calculation according to TS 45.002 Table 6
    * common/abis.c: fix 100% CPU usage after disconnecting OML/RSL link (Bug #1703)
    * sysmobts: Add the barebox boot state reservation
    * sysmo: add L3 handle to l1prim messages
    * LC15: Bring back DSP trace argument
    * LC15: Hardware changes: - Change system devices path - Remove obsoleted sensors and add new sensors - Change TRX and sensors numbering to 0,1 instead of 1,2 (JFD)
    * LC15: TRX nominal TX power can be used from EEPROM or from BTS configuration
    * Fix OML activation
    * TRX: Add vty command to power on/off transceiver
    * pcu_sock: add pcu_connected() to query PCU availability
    * tests/stubs.c: remove unused stubs
    * fix typo in error message ('at lEast')
    * oml, Set Chan Attr: treat unknown PCHAN types as error
    * dyn PDCH: rsl rx dchan: also log ip.access message names
    * dyn PDCH: cosmetic: lchan_to_GsmL1_SubCh_t(): add case for TCH_F_PDCH
    * doc: add ladder diagram on dynamic PDCH, add msc-README
    * add missing DSUM entry to bts_log_info_cat
    * TRX: add configuration example
    * Add .gitreview
    * fix compiler warning: printf format for sizeof()
    * fix compiler warning: add missing case (PHY_LINK_CONNECTING)
    * fix two compiler warnings: add two opaque struct declarations
    * dyn PDCH: add bts_model_ts_connect() and _disconnect() stubs
    * dyn PDCH: conf_lchans_for_pchan(): handle TCH/F_PDCH
    * dyn PDCH: pcu_tx_info_ind(): handle TCH/F_PDCH in PDCH mode
    * dyn PDCH: chan_nr_by_sapi(): handle TCH/F_PDCH according to ts->flags
    * dyn PDCH: implement main dyn PDCH logic in common/
    * dyn PDCH: sysmo-bts/oml.c: add ts_connect_as(), absorbing ts_connect() guts
    * dyn PDCH: sysmo: handle TCH/F_PDCH init like TCH/F
    * dyn PDCH: complete for sysmo-bts: implement bts_model_ts_*()
    * error log: two minor clarifications
    * debug log: log lchan state transitions
    * debug log: log TS pchan type on connect
    * DTX: add support for AMR/HR
    * Move copy-pasted code into common part
    * Use libosmocodec functions for AMR
    * Use error values instead of number for RSL error
    * Clarify logging message
    * fix lc15 build: put src/common/libbts.a left of -losmogsm
    * lc15: add L3 handle to l1prim messages
    * dyn PDCH: lc15: chan_nr_by_sapi(): handle TCH/F_PDCH according to ts->flags
    * dyn PDCH: lc15: add ts_connect_as(), absorbing ts_connect() guts
    * dyn PDCH: lc15: handle TCH/F_PDCH init like TCH/F
    * dyn PDCH: lc15: complete for litecell15-bts: implement bts_model_ts_*()
    * dyn PDCH: safeguard: exit if nothing pending in dyn_pdch_ts_disconnected()
    * vty: install orphaned trx nominal power command
    * fix compiler warnings: include bts_model.h in phy_link.c
    * fix compiler warning: remove useless 'static' storage class for struct decl
    * fix compiler warning: remove unused variable 'i' in calib_verify()
    * Make get_lchan_by_chan_nr globally available
    * DTXu: move copy-pasted code to common part
    * Remove duplicated nibble shift code
    * TRX: add Uplink DTX support for FR/HR
    * sysmobts: screnrc/systemd-service: Use osmo-bts-sysmo instead of sysmobts
    * Mark array as static const
    * sysmobts: Fix eeprom padding before gpg key
    * cosmetic: osmo-bts-trx: add comment, fix comment typo
    * log: osmo-bts-trx: change access burst logs to DEBUG level
    * log: osmo-bts-trx: change PDTCH block logs to DEBUG level
    * osmo-bts-trx: init OML only once by sending AVSTATE_OK with OPSTATE_ENABLED
    * sysmobts: dump PRACH and PTCCH parameters
* Sat Feb 20 2016 mardnh@gmx.de
  - Update to version 0.4.0.git1455563767.94bb376:
    + sysmobts: Clarify msgb ownership / fix memory leaks
    + fix large amount of compiler warnings in common and sysmobts code
    + l1sap: Whitespace fixes.
    + sysmobts: add missing break statement in l1if_handle_ind()
    + sysmobts-v2/eepromreader: Add userspace program to read EEPROM
    + sysmobts-calib: Warn about firmware and header mismatch
    + fix some format specifiers
    + print a NOTICE message if lchan not activ in get_active_lchan_by_chan_nr()
    + LAPDm: Use T200 settings from OML rather than libosmocore defaults
    + Add support for Octasic OCTSDR-2G GSM PHY
    + OCTPHY: Replace '-lortp' with the proper pkg-config/autofoo version
    + OCTPHY: Ensure we write the phy-netdev parameter
    + OCTPHY: Exit gracefully if config file specifies no phy-netdev
    + OCTPHY: Fix various memory leaks and add comments on msgb ownership
    + OCTPHY: Block PHY indications until it is confirmed open
    + OCTPHY: Print NOTICE message if we receive supervisory frame
    + OCTPHY: Implement command re-transmission after message loss
    + OCTPHY: Obtain information from PHY and expose it in VTY
    + TRX: remove obsolete get_mac() function
    + TRX: Add stub bts_model_change_power() function
    + sysmoBTS: port 'press Ctrl+C twice for immediate exit' from osmo-bts-trx
    + TRX: some comments dscribing the scheduler.[ch] API
    + TRX: mark scheduler data structures as 'const'
    + TRX: use const for dummy and fcch burst definitions
    + TRX: Reduce magic numbers, introduce GSM_HYPERFRAME for 2715648
    + move 'GSM_FR_BYTES' and related definitiions to common part
    + use existing #define for FR/EFR frame length (33/31)
    + TRX: make trx_chan_desc static, it is not used externally
    + TRX: schedule: remove dead code
    + TRX: scheduler: whitespace cleanup
    + TRX: replace some more 2715648 magic numbers with GSM_HYPERFRAME
    + TRX: Don't use magic numbers when we have #defines
    + TRX: Don't hard-code 23 bytes, use GSM_MACBLOCK_LEN
    + TRX: the L1SAP queue contains mac blocks, not bursts (cosmetic)
    + Fix T200 default values
    + Make T200 default initialization even more robust
    + OCTPHY: Don't have files in EXTRA_DIST that don't exist (anymore)
    + ABIS: Support for multiple RSL connections
    + common/support.c: Remove unused file
    + Add new bts_model_ctrl_cmds_install()
    + merge bts-specific main function into common/main.c:bts_main()
    + OCTPHY: fix 'make dist' (missing header files)
    + main: Return something from the method
    + Fix T200 default values
    + lapdm: Add DEBUGP statement about T200 values being set for lchan
    + OML: Ignore T200 settings by BSC for now
    + octphy: Look-up the right timeslot and then the logical chan
    + Revert "oml: temporary debug hack"
    + abis: Add a queue of OML messages
    + fix compile warnings
    + L1SAP: Ensure we don't process MPH-TIME.indication on TRX != C0
    + fix migration of check_for_ciph_cmd() from sysmobts to l1sap
    + TRX: factor out the scheduler from remaining code
    + TRX: split scheduler in generic part and backend part
    + TRX: call trx_loop_sacch_clock from TRX scheduler backend
    + TRX: scheduler: don't access l1h->config from scheduler
    + TRX: scheduler: Move trx_sched_clock() to scheduler_trx.c
    + TRX: scheduler: Remove dependency to trx_if.[ch]
    + TRX: Move scheduler to src/common
    + Introduce new phy_link and phy_instance abstraction
    + don't touch OML MO when PHY link is established
    + port sysmobts to phy_link/phy_instance abstraction
    + abis.c: Fix segfault on OML link loss
    + sysmobts: make clock calibration eeprom default (again?)
    + LC15: Add initial support for the NuRAN Wireless Litecell 1.5
    + LC15: Disable DSP trace flags by default
    + LC15: use talloc pool for msgb and ortp library
    + LC15: configure.ac: use --enable-litecell15 insteda of --enable-litecell15-bts
    + LC15: configure.ac: Allow specifying an alternate include-dir
    + LC15: port litecell 1.5 support to recent osmo-bts master
    + LC15: Add example configuration file for Litecell 1.5
    + LC15: cosmetic whitespace fixes
    + LC15: Fix printed msgq file names in error messages
    + LC15: fix compiler warning against more recent libosmovty
    + introduce + use new generic vty_get_phy_instance()
    + sysmobts/LC15: Fix startup-time DSP trace flage configuration
    + LC15: Remove unused clk_use_eeprom and clk_src fields
    + LC15/sysmobts: Don't try to refer to fl1h from PHY config
    + LC15: Remove clk_cal (another unused struct member)
    + LC15: Call l1if_reset() after l1if_open()
    + move auto-band configuration commands to common/vty.c
    + declare pcu_direct in pcu_if.h
    + make PCU socket and telnet port configurable
    + Use consistent naming of binaries accross BTS models
    + LC15: Fix 'make dist' (missing include files)
    + LC15: set nominal transmit power of 37dBm for all TRX
    + LC15: remove bogus check_for_ciph_cmd() copy
    + sysmobts_vty: Fix null-check for pinst
    + use unsigned int to compare wih ARRAY_SIZE
    + scheduler: Fix ARRAY_SIZE() in trx_sched_init()
* Sat Dec 26 2015 mardnh@gmx.de
  - Update to version 0.4.0.git1449483816.e28a20a:
    + amr: Catch up with the amr_mode changes
    + amr: Catch-up for the non-RTP mode after amr rename
    + configure.ac: Only require libgps if building for sysmoBTS
    + configure.ac: Depend on libosmotrau 0.3.2 (ortp statistics)
    + configure.ac: Add subdir-objects to suppress warnings
    + configure.ac: Better description for --enable-sysmocom-bts and --enable-trx
    + Revert "configure.ac: Add subdir-objects to suppress warnings"
    + Don't blindly link against '-lortp' but use pkg-config for that
    + TRX: catch up with trhe amr_mode naming changes
    + tests/Makefile.am: Don't use sysmobts SUBDIRS twice
    + cope with 'struct gsm_bts' without a tsc member
    + sysmobts: fix ph_data_req() msgb handling + alignment
    + sysmobts: Dont recycle PHY primitive for L1SAP in PH-DATA.ind
    + common/rsl.c: The presence of a valied measurement result is DEBUG
    + l1sap: Ensure we only pass PHY primitives of active lchans
    + osmo-bts-sysmo: Disable DSP trace flags by default
    + use talloc pool for msgb and ortp library
    + sysmobts: support eeprom map version 2
    + sysmobts: Catch up with the API changes and specify the version
* Tue Sep 22 2015 mardnh@gmx.de
  - Update to version 0.3.0.git1442932914.f1fb0fa:
    + update README to bring it more in sync with reality.
    + audio/rsl: Include the connection identifier in the DLCX ind
    + audio/rsl: Include statistics for one call
    + audio/rsl: Honor the speech mode and don't send anything
    + Add BCCH message to PH-/MPH-/TCH-SAP interface
    + l1sap: Split ph_data_req() into smaller parts
    + Add RACH message to PH-/MPH-/TCH-SAP interface
    + l1sap: Use L1SAP_IS_CHAN_RACH instead of magic number 0x88
    + l1sap: fix coding style
    + l1sap: fix missing include file and resulting compiler warning
    + l1sap: RACH: Detect hand-over even on TRX0
    + l1sap: correctly set chan_nr on PRIM_PH_RACH / INDICATION
    + l1sap: sysmobts: remove obsolete get_lapdm_chan_by_hl2()
    + Add PCH/AGCH message to PH-/MPH-/TCH-SAP interface
    + l1sap: Add a warning about assuming BS_AG_BLKS_RES=1
    + Add PDCH messages to PH-/MPH-/TCH-SAP interface
    + l1sap: additional comments explaining l1sap changes in l1_if.c
    + Add TIME (MPH_INFO) IND messages to PH-/MPH-/TCH-SAP interface
    + l1sap: Re-introduce more correct RACH slot counting
    + Relace bts_model_get_time() by get_time() at common part
    + Move chan act/rel/modify from bts_model to PH-/MPH-/TCH-SAP interface
    + l1sap: re-introduce a comment that was lost during l1sap merge
    + Add TCH messages to PH-/MPH-/TCH-SAP interface
    + l1sap: Use {data,empty}_req_from_l1sap() and avoid code duplication
    + l1sap: Avoid compiler warnings regarding uninitialized nmsg
    + Add SDCCH/SACCH/FACCH messages to PH-/MPH-/TCH-SAP interface
    + sysmobts/l1_if: Sacch/Sdcc/Facch are handled in l1sap/core
    + l1sap: Port code to new ciphering handling
    + Add MEAS (MPH_INFO) IND message to PH-/MPH-/TCH-SAP interface
    + sysmobts: Clean up transitions for lchan cipher state
    + Send primitives at PH-/MPH-/TCH-SAP interface via GSMTAP
    + Move gsmtap VTY commands from osmo-bts-sysmo to common part
    + Add gsmtap option to command line to main.c of osmo-bts-sysmo
    + Remove obsolete gsmtap handling from osmo-bts-sysmo part.
    + Move detection of handover frames from sysmo-bts code to common code
    + move MS power control handling from sysmobts to common part
    + fix: make sysmobts tests only when sysmobts is enabled
    + Fix: Retrieve ARFCN (from OML) for TRX other than C0
    + Fix: Process all TRX on GSM Time indication, not only C0
    + Fix: Call e1inp_vty_init() before reading config file
    + Change to new structure of multirate at gsm_data_shared.h
    + TRX: Introduce osmobts-trx, a layer 1 implementation for OpenBTS tranceivers
    + Add test code for testing GSM burst transcoding
    + TRX: On negative response of critical commands, shutdown BTS
    + ABIS: Introduce bts_model_abis_close to indicate ABIS link failure.
    + TRX: Power down tranceiver and reset scheduler, if abis link is lost
    + TRX: Completed transcoding of TCH with reordering Table 2 of TS 05.03
    + Add test routing to test transcoding of TCH FR / FACCH frames
    + Fix: Check right result on bursts_test
    + TRX: Fixes and improvements of scheduler
    + TRX: Use received TRX clocks to determine availablility of tranceiver
    + TRX: Fix, never send confirm for DEACT SACCH request (TS 05.08 4.6)
    + TRX: Minor fixes, especially handle TOA of RACH correctly
    + TRX: Fixed swapped stealing bits
    + TRX: Completed TCH/F full rate support
    + TRX: Allow transcoding of TCH FR with MSB first (RTP) or LSB first (E1)
    + TRX: Lost TCH frame detection of omitted bursts from tranceiver
    + TRX: PDTCH (GPRS) works now
    + TRX: Add test code for PDTCH transcoding
    + TRX: Detect missing received bursts and fill them with zero-sbits
    + TRX: By default, send 20 frames in advance to tranceiver
    + TRX: Cleanup of channel transcoding
    + TRX: Replaced GSM 06.10 ordering table by table in libosmocodec
    + TRX: Ciphering
    + TRX: Fix of SCH burst data
    + TRX: Fixes to TRX interface
    + TRX: Improved handling of clock indications.
    + TRX: Implementation of MS power and timing advance loops
    + TRX: Out of range primitives found in downlink queue are not an error
    + TRX: Use link timeout value from BSC via OML attribute.
    + TRX: Code cleanup, prepare for other codecs than GSM full rate
    + TRX: Add support for EFR transcoding
    + Get RSSI from received uplink data and send to PCU
    + TRX: Support for AMR full speech
    + TRX: Add AMR Payload handling
    + TRX: Support for TCH/H and GSM half rate transcoding
    + TRX: Support for AMR half speech
    + TRX: Reset ciphering state when closing channel
    + TRX: Add VTY options to enable and disable SETTSC and SETBSIC
    + Allow one or more TRX to configure via VTY
    + TRX: Fix: Cleanly free TRX instances during initialization in case of an error
    + TRX: Fixed typos tranceiver -> transceiver
    + TRX: Report measurements
    + TRX: Clear lchan state when resetting TRX
    + TRX: Handover access burst support
    + TRX: Use correct slot type for GSM_PHCAN_BCCH
    + TRX: Disable handover burst detection when closing channel during detection
    + TRX: Process real time scheduling option is now similar to sysmobts
    + Add test case for successful handover and unsuccessful handover
    + TRX: Set ciphering to an initial state when activating channel
    + TRX: If no cipher algorithm is given, or if it is a5/0, reset cipher state
    + TRX: No need to set mode and cipher for PDCH
    + TRX: Fixup ciphering state names after rebasing
    + TRX: Add bts_model_trx_close to TRX implementation
    + TRX: Close TRX (shutdown all active channels) on ABIS link failure
    + TRX: Do not send burst on IDLE channels at TRX != C0
    + trx: Add option to set transmit power reduction via OML (BSC)
    + TRX: Fixed chan_nr for SACCH/8(7) at scheduler
    + TRX: Changed logging of unserved primitives from LOGL_NOTICE to LOGL_INFO
    + Allow TRX 0..254 at VTY, even if less TRX are available
    + tests: make tests for sysmobts conditional
    + build: Use AM_CPPFLAGS in Makefile.am
    + TRX: fix some typos in comments
    + TRX: Add VTY option to allow setting RTS advance in frames
    + TRX: Free bust buffer memory to when changing lchan type
    + TRX: Activate LCHAN of CCCH when CCCH is configured on time slot
    + trx: Set lchan inactive, only if the dedicated channel is deactivated
    + TRX: Show which TRX does not respond or rejects a command
    + TRX: Check if Transceiver indicates an out of range clock
    + TRX: Remove extra TCH/HS puncturing value
    + trx: Implement BER calculations.
    + tests: Update bursts_test to accommodate BER calculations.
    + trx: More logging for voice frame decoding functions.
    + trx: Fix typo in a log message.
    + trx: Remove unused variables.
    + trx: Cleanup unused parts of loops.c
    + trx: Assume 100% BER if total decoded bits is 0 in l1if_process_meas_res()
    + trx: Send POWERON/OFF commands to osmo-bts only for the first channel.
    + trx: fix potential use of uninitialized toa variable.
    + tests: Update busrsts_test build.
    + fixup tests after bts_model_adjst_ms_pwr
    + make osmo-bts-trx provide bts_model_adjst_ms_pwr()
    + TRX: Add missing call to abis_init()
* Tue Jul 14 2015 mardnh@gmx.de
  - Update to version 0.3.0.git1436860556.a7c276b:
    + sysmo-bts: Use correct boundaries of L1 msg when forwarding to L1 proxy
    + Add header file of PH-/MPH-/TCH-SAP interface to common part of osmo-bts
    + write_queue: Check the result of osmo_wqueue_enqueue and free
    + meas: Do not send incomplete measurement reports
* Sun Feb 15 2015 mardnh@gmx.de
  - Update to version 0.3.0.git1423171973.b631bd2:
    + cbch: Speculative change to not change CHAN ACK for CBCH
    + msg: Generalize the message structure test
    + sysmobts: Begin with calib control from the sysmobts manager
    + sysmobts: Copy more of l1if_rf_clock_info_reset into the CTRL code
    + sysmobts: Use the ctrl interface for calibration
    + sysmobts: The correction for GPS is in the reverse direction
    + sysmobts: Initial version to use libgps to determine FIX state
    + sysmobts: Start the calibration the first time the link is up
    + sysmobts: Create a calibration loop that will be run
    + sysmobts: Improve some log messages for calib control
    + misc: Fix up testcase after 5a03e129a633637d0a6b57b3b5aa6d6596b938fe
    + sysmobts: Check mgr->calib.bts_conn for NULL
    + power/sysmobts: Add a manual ms power level control
    + power: Make it possible to force a power level
* Tue Dec 30 2014 mardnh@gmx.de
  - Update to version 0.3.0.git1419943502.8fc2630:
    + sysmobts: Include the serial number in the find response
    + Initial CBCH support
    + CBCH: Implement CBCH block segmentation and RSL_MT_SMS_BC_CMD
    + SMS-CB: Use GSM412_ #defines from libosmocore rather than our own
    + SMS-CB: use gsm412_block_type from libosmocore
    + SMS-CB: Use GSM412_SEQ_NULL_MSG rather than 0xf
    + SMS-CB: Clean up + centralize generation of NULL block
* Thu Dec 18 2014 mardnh@gmx.de
  - Update to version 0.3.0.git1418757748.c265bef:
    + bts: Move BTS and children into the enabled state after opstart
    + sysmobts: Actions can be executed in all levels
    + sysmobts: Add an option to stop the systemd sysmobts.service
    + eeprom: Fix brown paper bag introduced a long while ago
    + sysmobts: Don't list non integer parameters in the help
    + sysmobts: Read the clock calibration from another place
    + sysmobts: Remove unused global variables
    + sysmobts: Add "normal" actions to execute
    + sysmobts: Comment out the varpoware options that are not implemented
    + sysmobts: Add slave on/off action for the sysmoBTS2050

Files

/etc/osmocom
/etc/osmocom/osmo-bts-virtual.cfg
/usr/bin/osmo-bts-virtual
/usr/lib/systemd/system/osmo-bts-virtual.service
/usr/sbin/rcosmo-bts-virtual


Generated by rpm2html 1.8.1

Fabrice Bellet, Tue Jul 9 11:45:28 2024