Index index by Group index by Distribution index by Vendor index by creation date index by Name Mirrors Help Search

debhelper-13.11.4-bp155.1.5 RPM for noarch

From OpenSuSE Leap 15.5 for noarch

Name: debhelper Distribution: SUSE Linux Enterprise 15 SP5
Version: 13.11.4 Vendor: openSUSE
Release: bp155.1.5 Build date: Wed May 17 15:36:11 2023
Group: Development/Tools/Building Build host: old-cirrus3
Size: 1264726 Source RPM: debhelper-13.11.4-bp155.1.5.src.rpm
Packager: https://bugs.opensuse.org
Url: https://salsa.debian.org/debian/debhelper
Summary: Helper programs for debian/rules
A collection of programs that can be used in a debian/rules file to
automate common tasks related to building debian packages. Programs
are included to install various files into your package, compress
files, fix file permissions, integrate your package with the debian
menu system, debconf, doc-base, etc. Most debian packages use debhelper
as part of their build process.

Provides

Requires

License

GPL-2.0-or-later

Changelog

* Thu Jan 05 2023 Dirk Müller <dmueller@suse.com>
  - update to 13.11.4:
    * meson.pm: Pass --destdir to `meson install`.  (Closes: #1027014)
    * Dh_Lib.pm: Have addsubstvars check the value for newlines (Closes: #1026014)
    * Stop using (fake)root for mkdirs again.
      Should have been removed as a part of the clean up in the previous
      upload but was overlooked causing breakage in packages still having
      `Rules-Requires-Root: binary-targets`. (Closes: #1026125)
    * PROGRAMMING.md: Fix typos
    * Dh_Lib.pm: Remove unused third parameter from install_dh_config_file
    * makefile.pm: Provide hook for subclasses to reuse cross-build support
    * Dh_Lib.pm: Revert change where `install_{file,prog,lib}` would use chown.
      The problem that prompted this change was not caused by debhelper but
      by fakeroot (#1024544) and the change in debhelper would not even
      function as a work around in this case.  Accordingly, the extra
      complexity is not worth it and has been reverted.
    * Dh_Lib.pm: Fix typo in warning message about dherroron
* Mon Dec 12 2022 Jan Baier <jbaier@suse.com>
  - Update to version 13.11.1
    * dh_installchangelogs: Ensure that at least four old entries are preserved
      (Closes: #1021467)
    * meson.pm: Use `meson setup` in the configure step rather than just `meson`.
    * Put newest compat level first in documentation
    * Rename debhelper config files to include package name
    * dh_installdebconf: Fix typo in manual page
    * Dh_Lib.pm: `qx_cmd` support env/chdir changes like `doit` (Closes: #1016354)
    * Remove obsolete compat checks in the code
    * dh_dwz: Ensure dwz multifile is owned by root:root when root should be used
    * dh_builddeb: Always pass `--root-owner-group` to `dpkg-deb` for dbgsym packages.
    * Dh_Lib.pm: Provide `mkdirs` to create (non-package) directories.
    * Dh_Lib.pm: Make `install_dir` chown created directories when root should be
      used for debhelper's own commands.  This fixes #1024261 for packages that only
      use debhelper itself. However, third-party debhelper tools may still cause
      packages with incorrect ownership for now if they are run after `dh_fixperms`
      (or `dh_fixperms` is omitted).
    * Dh_Lib.pm: Ensure `install_{file,prog,lib}` uses chown when root should be used.
      Previously, they would skip the `chown` call and rely on `dh_fixperms`
      or `dpkg-deb` to fix the ownership.  However, that could cause issues
      when the helper was run after `dh_fixperms` and install files that
      `dpkg-deb` would not reset ownership of.
    * Install `installsysusers` sequence (to match the provide).
    * dh_installchangelogs: Trim old Debian changelog entries
      automatically.  Distributions can disable this by using
      `DEB_BUILD_OPTIONS=notrimdch`.
    * dh_installchangelogs.t: Force locale to be `C.UTF-8` to
      avoid generating invalid changelog entries under
      non-default locales.
    * meson.pm: Stop providing `MESON_TESTTHREADS` environment
      variable for the install target.  Said variable only
      applies for testing.
    * cmake.pm: Use `cmake --install` in compat 14.
      (Closes: #1020732)
    * docs/PROGRAMMING{,.md}: Rewrite PROGRAMMING into markdown.
    * dh_installsystemduser: Stop masking user units on package
      removal.  They should never have been masked in the first
      place.  See #1021027.
    * dh_installinit: Remove executable bit of init scripts on
      package removal (via preinst).  Related to #1021027.
    * dh_installsystemd: Stop masking system units on package
      removal.  This is no longer necessary with the init scripts
      getting their exec bit cleared on package removal.
      (Closes: #1021027)
    * Dh_Lib.pm: Add `package_type` as a function (extracted
      from `is_udeb`).
    * Dh_Getopt.pm: Fix duplicated `warning` in output for a
      particular warning.
    * dh_assistant: Provide a new `detect-hook-targets` command.
    * dh: Recommend using `dh_assistant detect-hook-targets` for
      checking whether hook targets are correct.
    * dh: Hoist `nodoc` and `nocheck` from `DEB_BUILD_PROFILES`
      into `DEB_BUILD_OPTIONS` when they are present in the former
      and absent in the latter.  Emit a warning when doing so to
      aid the user, so they know why this does not work when they
      are later building a package that does not use dh.
      (Closes: #979401)
    * dh: Provide a warning when cross building an `nocheck` is
      absent from `DEB_BUILD_OPTIONS` to cross builders, who are
      not experienced with Debian's requirements for
      cross-building.  The warning also recommends activating the
      `cross` build profile and provides a way to disable the
      warning without using `nocheck` (for the special case, where
      people have a system that can run host binaries).
    * Dh_Lib.pm: Fix bug where `addsubstvars` would not respect
      the `--no-act` parameter.
    * dh_perl: For scripts that are detected as perl scripts
      that would trigger a dependency, normalize the shebang line to
      use the same perl as debhelper is run under (/usr/bin/perl
      in Debian, YMMV in derivatives).  (Closes: #904409)
    * dh_assistant: Provide new `log-installed-files` command to
      help users and third-party tools record which files they have
      installed.  Third-party tools should use the
      `--on-behalf-of-cmd` to have their tool name recorded.
      (Closes: #972724)
    * dh_installexamples: Explicitly recommend `examples/*` over
      `examples` as content for the `debian/<pkg>.examples` file
      to avoid the triggering `.../examples/examples` case.
      (Closes: #1000384)
    * debhelper.pod: Clarify the documentation around `-v` +
      `--verbose` vs. `DH_VERBOSE` vs. `DH_QUIET` and `terse`
      from `DEB_BUILD_OPTIONS`.  Notably, clarify that `-v`
      and `DH_VERBOSE` provides the same functionality and
      that they do not cause *all* commands to be shown.
      (Closes: #1002464)
    * Update Portuguese translation (Américo Monteiro)
      (Closes: #1019231)
    * autoscripts/postinst-init-tmpfiles: Re-instate runtime check
      before running `systemd-tmpfiles`. However, explicitly check
      for `systemd-tmpfiles` rather than asserting the system was
      booted by systemd. This resolves #1013969 without requiring
      a strict dependency as originally suggested by Guilhem Moulin
      in #1013969.
    * dh_installtmpfiles: Remove the `systemd | systemd-tmpfiles`
      dependency as it is no longer required.  (Closes: #1017441)
    * dh_installsystemd: Ditto.
    * dh_installinit: Ditto.
    * autoscripts/postinst-init-tmpfiles: Only pass `--root` to systemd
      when `DPKG_ROOT` is present (as `--root=/` is different from
      omitting `--root` entirely).
    * autoscripts/postinst-sysusers: Ditto
* Mon Aug 15 2022 Jan Baier <jbaier@suse.com>
  - Update to version 13.9
    * d/control: Provide dh-sequence-installsysusers.
    * debhelper.pod: Add missing word "variables".
    * Dh_Lib.pm: Fix in addsubstvar where a value was added when
      it should not have been.  (Closes: #1015263)
* Thu Aug 04 2022 Jan Baier <jbaier@suse.com>
  - Update to version 13.8
    * dh_perl: Fix incorrect binary versioning caused by a regression
      in 13.3.  Thanks to Niko Tyni for reporting the issue.
      (Closes: #997961)
    * d/control: Bump Standards-Version to 4.6.1 - no changes required.
    * root_sequence.pm: Run `dh_installsysusers` before
      `dh_installtmpfiles` (only affects compat 14 or later).  Thanks
      to Nicholas Brown for the suggestion.  (Closes: #1011099)
    * autoscripts/postinst-init-tmpfiles: Remove runtime check on the
      system having systemd as init system.
    * dh_installtmpfiles: Replace runtime check on the system running
      under systemd in generated `postinst` script with a dependency
      on `systemd | systemd-tmpfiles` added to `${misc:Depends}`.
      Thanks to Guilhem Moulin for the suggestion.  (Closes: #1013969)
    * dh_installsystemd: Ditto.
    * dh_installinit: Ditto.
    * debhelper-compat-upgrade-checklist.pod: Correct description for
      the addition of dh_installsysusers in compat 14.
    * meson.pm: Use `meson install` instead of `ninja install` for
      dh_auto_install in compat 14.  Thanks to Andrea Pappacoda for
      the suggestion.  (Closes: #1006805)
    * Dh_Lib.pm: Remove double semi-colon.  (Closes: #1010591)
    * Dh_Lib.pm: _strip_spaces now explicitly returns undef on undef
      argument.
      (Closes: #1010594)
    * cmake.pm: Set FETCHCONTENT_FULLY_DISCONNECTED to true.  This
      ensures that the `FetchContent` module does not attempt to
      use internet connection.
    * debhelper-compat-upgrade-checklist.pod: Update documentation
      for compat 14 change.  (Closes: #1011404)
    * debhelper.pod: Correct link to the new upgrade checklist.
      (Closes: #1012777)
    * dh_installman: Avoid false positive language detection on
      shared libs.
    * Update Portuguese translation (Américo Monteiro)
      (Closes: #1011256)
* Mon May 02 2022 Jan Baier <jbaier@suse.com>
  - Update to version 13.7.1
    * debhelper.pod: Fix several typos.  Thanks to Guillem Jover
      for pointing them out and proposing corrections.
    * dh_installalternatives: Correct a file check that caused
      false-positive rejections of valid alternatives files.  Thanks to
      Hiroyuki YAMAMORI for reporting the bug and providing an initial
      patch.  (Closes: #1009844)
* Mon May 02 2022 Jan Baier <jbaier@suse.com>
  - Update to version 13.7
    * dh_installalternatives: Improve validation of alternative files to
      catch some "obvious" copy-waste mistakes.
    * dh: Invoke dh_installalternatives after dh_link in compat 14 or
      later. Thanks to Colin Watson for the suggestion.
      (Closes: #1002800)
    * cmake.pm: Drop -DCMAKE_SKIP_RPATH=on in compat v14.  Thanks to
      Vagrant Cascadian for the suggestion and the investigative work on
      this topic.  (Closes: #1004939)
    * debhelper-compat-upgrade-checklist.pod: New file.
    * debhelper.pod: Move list of supported compat levels and the related
      upgrade checklist into debhelper-compat-upgrade-checklist.pod.
      This means you now need `man 7 debhelper-compat-upgrade-checklist`
      to see the upgrade checklist.
    * dh_installdebconf: Support -D/--define command line parameters
      (mirroring those from dh_installdeb).
    * Dh_Lib.pm: Cope with "?=" as assignment operator in substvars files
      to be future proof with (possible) planned addition of "optional
      substvars.  At the moment, debhelper will still always use "=" when
      adding a substvar but it will now preserve "?=" operator if an
      existing substvar is modified.
    * autoconf.pm: Add support for autotest test suites by passing the
      TESTSUITEFLAGS environment variable to `make test`.
    * Rewrite handling of stop services to use the `preinst` when using
    - -no-restart-after-upgrade.  This fixes a regression caused by
      the fix for #989155.  (Closes: #994204)
    * dh_installmenu: Respect DPKG_ROOT when checking for update-menus.
      Note this implementation assumes update-menus is present both
      inside and outside the chroot to activate.  If it is absent on
      either side, the update-menus call is skipped.
    * dh_installsysusers: Invoke systemd-sysusers even when DPKG_ROOT
      is set (relying on `--root`).
    * dh_installpam: In compat 14, install pam snippets into
      `/usr/lib/pam.d` instead of `/etc/pam.d`.  Remember to remove
      (now) obsolete conffiles when you bump to compat 14.
    * debhelper.pod: Correct spelling of DEB_BUILD_MAINT_OPTIONS.
* Mon Jan 03 2022 Jan Baier <jbaier@suse.com>
  - Update to version 13.6
    * dh_assistant: Avoid creating `debian/.debhelper` when the
      which-build-system sub command is invoked.  Thanks to
      Jelmer Vernooij for spotting that bug.
    * dh_assistant: Add new active-compat-level command, which
      outputs information about which compat level is declared
      and active.  It also tells how the compat level was
      declared.
    * Dh_Lib.pm: Add new function, get_non_binnmu_date_epoch,
      only needed for dh_strip_nondeterminism.
    * dh_installcron: Add support for `cron.yearly` packaging
      file.  Thanks to Martin-Éric Racine for the suggestion.
      (Closes: #1000363)
    * Dh_Lib.pm: Remove support for compat 5 and 6.
    * debhelper.pod,debhelper-obsolete-compat.pod: Update to
      reflect the new status for compat 5 and 6.
    * dh: Add missing _ in execute_after example in POD.
    * dh_compress: Exclude .woff and .woff2 by default.
    * Update Portuguese translation (Américo Monteiro)
      (Closes: #1000719)
* Mon Oct 18 2021 Jan Baier <jbaier@suse.com>
  - Update to version 13.5.2
    * dh_installsystemd: Revert change to deploy systemd files into
      usr/lib/systemd.  (Closes: #993316, #993759)
    * dh_installinit: Ditto.
    * dh_systemd_enable: Ditto.
    * dh_systemd_start: Ditto.
    * SequencerUtil.pm: Remove duplicate "-a" option to some commands.
      Thanks to Christoph Berg for reporting the issue.
      (Closes: #971761)
    * dh_installdeb: Revert the change to rewrite `rm_conffiles` into
      `remove-on-upgrade` due to it causing bugs in non-trivial cases.
      (Closes: #994919)
    * dh_installtmpfiles: Add missing option name in POD documentation.
    * cmake.pm: make it possible to override dh provided ctest arguments
    * cmake.pm: Add missing import which broke cmake related builds.
      Thanks to Boyuan Yang for reporting the issue.
      (Closes: #993345)
    * dh_installdeb: Install debian/conffiles in compat 12+ again
      (undoing the compat 12 change saying dh_installdeb would ignore
      this file).  The file can now be using for the activating the
      `remove-on-upgrade` feature from dpkg 1.20.
    * dh_installdeb: Automatically rewrite `rm_conffiles` into the
      new `remove-on-upgrade` feature from dpkg when possible.
    * cmake.pm: Pass `ARGS+=--verbose` to make when running tests
      in the cmake+make variant except when "terse" is in
      DEB_BUILD_OPTIONS.  Thanks to Paul Wise for the suggestion.
      (Closes: #992623)
    * python_support.pm: Remove obsolete dh addon.  It did nothing
      but warn and nothing used it anymore.
    * dh: Document debhelper provided dh addon sequences.
    * single_binary.pm: New dh addon ("single-binary") that explicitly
      activates the "single binary" work flow, where dh_auto_install
      uses debian/<pkg> as default --destdir when there is only a
      single binary package.  It will error out if used in a
      source package building multiple binary packages.
    * dh: Activate "single-binary" addon by default in compat levels
      up to and including compat 14 when the source package only lists
      one binary package in debian/control.  In compat 14, emit a warning
      when this happens implicitly requesting users to explicitly enable
      or disable the addon for single binary source packages to avoid
      surprises in compat 15.
    * dh_auto_install: In compat 15, remove special-case default for
    - -destdir for single binary source packages.  If the previous
      default is desired, please use the "single-binary" dh addon or
      explicitly pass --destdir to dh_auto_install.
      (Closes: #971432)
    * debian/control: Provide dh-sequence-single-binary.
    * debhelper.pod: Document the dh_auto_install will change behaviour
      in compat 15 for single binary packages and dh will warning about
      that in compat 14.
    * dh_assistant: New tool for assisting third-party tools.  At the
      moment, it primarily supports introspection related features but
      will hopefully be extended to support more use cases.
      (Closes: #984900)
* Mon Oct 18 2021 Jan Baier <jbaier@suse.com>
  - Update to version 13.4.1
    * autoscripts/*: Replace `which` with `command -v`.
    * dh_installsystemd: Only merge /lib/systemd/system into /usr
      for now.  (Closes: #992554)
    * dh_systemd_enable: Ditto.
    * autoscripts/postinst-init-nostart: Call invoke-rc.d when
      a non-empty DPKG_ROOT is used.  (Closes: #992556)
    * Replace "use v5.28" with "use v5.24" in Dh_Lib.pm.
      The change to "use v5.28" in 13.4 broke the test to distinguish 0755
      from "0755" in the reset_perm_and_owner function, breaking builds.
      Thanks Adrian Bunk and Ansgar for help isolating the problem.
    * debian/changelog: Correct bug number in the 13.4 entry.
    * dh_dwz: run in parallel across packages.  (Closes: !47)
    * Dh_Buildsystems.pm: Add bmake and mkcmake as third-party
      build systems.  (Closes: !46)
    * Dh_Buildsystems.pm: Add golang as a third-party build
      system.  (Closes: #981106)
    * autoscripts/*: Add support for DPKG_ROOT in systemd, tmpusers,
      sysusers and init related snippets.  Based on an initial patch
      from Helmut Grohne.  (Closes: #983566)
    * autoscripts/*: Reorder conditions in some scripts to avoid
      doing a redundant stat call when a script parameter can decide
      to skip it.
    * dh_gconf: Remove the command as it does nothing.
      (Closes: #908845)
    * doc/TODO: Remove reference to dh_gconf.
    * root_sequence.pm: Remove dh_gconf from root sequence and declare
      it as obsolete (causing errors from compat 14 if still referenced
      in hook targets).
    * man/po4a/po4a.cfg: Remove dh_gconf from translations.
    * AddonAPI.pm: The declare_command_obsolete command now accepts an
      "$error_compat" parameter to enable addons to choose which compat
      level that will trigger an error (though it must be minimum 13).
    * doc/PROGRAMMING: Update docs to reflect API change.
    * debhelper.pod: Document that referencing dh_gconf in hook targets
      will cause an error in compat 14.
    * dh_fixperms: Correct permissions of files beneath usr/libexec to
      be executable.  (Closes: #979401)
    * dh_installtmpfiles: Only register tmpfiles ending with ".conf" as
      tmpfiles in /usr/lib/tmpfiles.d and /etc/tmpfiles.d.  This ensures
      that dh_installtmpfiles gracefully copes with e.g. README files
      provided by systemd upstream.  (Closes: #986329)
    * dh_installsystemd: Ditto (but only relevant in compat 12 or
      earlier)
    * cmake.pm: Pass -DCMAKE_FIND_USE_PACKAGE_REGISTRY=OFF to cmake in
      addition to -DCMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY=ON as the
      former is intended to replace the latter.  Thanks to Raul Tambre
      for reporting the issue.  (Closes: #988973)
    * Dh_Lib.pm: Bump version requirement to v5.28 to reflect the actual
      requirements (the code was using v5.28 features).  Thanks to
      Sérgio Basto for reporting the issue.
    * dh_missing: Ditto.
    * autoscripts/postinst-init,autoscripts/postinst-systemd-start: Use
      "restart" instead of "start" when starting the services.  This
      ensures a smooth transition from --restart-after-upgrade to
    - -no-restart-after-upgrade in dh_installinit and dh_installsystemd.
      Thanks to Ryan Tandy for reporting the issue.
      (Closes: #989155)
    * dh_installsystemd: Remove usage of autoscripts/postinst-systemd-restart
    * dh_installinit: Remove usage of autoscripts/postinst-init-restart
    * autoscripts/autoscripts/postinst-systemd-restart: Removed.
    * autoscripts/postinst-init-restart: Removed
    * dh_installsystemd: Prefer /usr/lib/systemd/ to /lib/systemd.
      (Closes: #987989)
    * dh_systemd_enable: Ditto.
    * dh_systemd_start: Ditto.
    * dh_installinit: Ditto.
    * dh_installsystemd: Merge /lib/systemd into /usr/lib/systemd if both
      are present in the package staging directory (prefering the latter
      in case of conflicts).  (Closes: #987989)
    * dh_systemd_enable: Ditto.
    * perl_build.pm,perl_makemaker.pm: Make debhelper use the same perl
      as it runs under (via Perl's $^X variable) when invoking the
      upstream build system.  (Closes: !40, #966396)
    * Always generate unique doc-base file names based on package name and
      document ID. (Closes: #980903)
* Tue Mar 16 2021 Jan Baier <jbaier@suse.com>
  - Update to version 13.3.4
  - Adapt patches to new upstream version:
    * remove debhelper-9.20150101-no-localized-manpages.patch
    * add debhelper-no-localized-manpages.patch
* Sun Jul 24 2016 p.drouand@gmail.com
  - Update to version 9.20160709
* Sun Jan 04 2015 p.drouand@gmail.com
  - Update to version 9.20150101
  - Adapt debhelper-no-localized-manpages.patch to upstream changes
    * debhelper-9.20150101-no-localized-manpages.patch
  - Remove upstreamed debhelper-findutils.patch

Files

/usr/bin/dh
/usr/bin/dh_assistant
/usr/bin/dh_auto_build
/usr/bin/dh_auto_clean
/usr/bin/dh_auto_configure
/usr/bin/dh_auto_install
/usr/bin/dh_auto_test
/usr/bin/dh_bugfiles
/usr/bin/dh_builddeb
/usr/bin/dh_clean
/usr/bin/dh_compress
/usr/bin/dh_dwz
/usr/bin/dh_fixperms
/usr/bin/dh_gencontrol
/usr/bin/dh_icons
/usr/bin/dh_install
/usr/bin/dh_installalternatives
/usr/bin/dh_installcatalogs
/usr/bin/dh_installchangelogs
/usr/bin/dh_installcron
/usr/bin/dh_installdeb
/usr/bin/dh_installdebconf
/usr/bin/dh_installdirs
/usr/bin/dh_installdocs
/usr/bin/dh_installemacsen
/usr/bin/dh_installexamples
/usr/bin/dh_installgsettings
/usr/bin/dh_installifupdown
/usr/bin/dh_installinfo
/usr/bin/dh_installinit
/usr/bin/dh_installinitramfs
/usr/bin/dh_installlogcheck
/usr/bin/dh_installlogrotate
/usr/bin/dh_installman
/usr/bin/dh_installmanpages
/usr/bin/dh_installmenu
/usr/bin/dh_installmime
/usr/bin/dh_installmodules
/usr/bin/dh_installpam
/usr/bin/dh_installppp
/usr/bin/dh_installsystemd
/usr/bin/dh_installsystemduser
/usr/bin/dh_installsysusers
/usr/bin/dh_installtmpfiles
/usr/bin/dh_installudev
/usr/bin/dh_installwm
/usr/bin/dh_installxfonts
/usr/bin/dh_link
/usr/bin/dh_lintian
/usr/bin/dh_listpackages
/usr/bin/dh_makeshlibs
/usr/bin/dh_md5sums
/usr/bin/dh_missing
/usr/bin/dh_movefiles
/usr/bin/dh_perl
/usr/bin/dh_prep
/usr/bin/dh_shlibdeps
/usr/bin/dh_strip
/usr/bin/dh_systemd_enable
/usr/bin/dh_systemd_start
/usr/bin/dh_testdir
/usr/bin/dh_testroot
/usr/bin/dh_ucf
/usr/bin/dh_update_autotools_config
/usr/bin/dh_usrlocal
/usr/lib/perl5/vendor_perl/5.26.1/Debian
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Buildsystem
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Buildsystem.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Buildsystem/ant.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Buildsystem/autoconf.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Buildsystem/cmake.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Buildsystem/makefile.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Buildsystem/meson.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Buildsystem/ninja.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Buildsystem/perl_build.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Buildsystem/perl_makemaker.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Buildsystem/python_distutils.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Buildsystem/qmake.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Buildsystem/qmake_qt4.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/DH
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/DH/AddonAPI.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/DH/SequenceState.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Dh_Buildsystems.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Dh_Getopt.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Dh_Lib.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Dh_Version.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Sequence
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Sequence.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Sequence/build_stamp.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Sequence/dwz.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Sequence/elf_tools.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Sequence/installinitramfs.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Sequence/installsysusers.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Sequence/root_sequence.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Sequence/single_binary.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/Sequence/systemd.pm
/usr/lib/perl5/vendor_perl/5.26.1/Debian/Debhelper/SequencerUtil.pm
/usr/share/debhelper
/usr/share/debhelper/autoscripts
/usr/share/debhelper/autoscripts/maintscript-helper
/usr/share/debhelper/autoscripts/postinst-alternatives
/usr/share/debhelper/autoscripts/postinst-emacsen
/usr/share/debhelper/autoscripts/postinst-icons
/usr/share/debhelper/autoscripts/postinst-init
/usr/share/debhelper/autoscripts/postinst-init-nostart
/usr/share/debhelper/autoscripts/postinst-init-restart
/usr/share/debhelper/autoscripts/postinst-init-tmpfiles
/usr/share/debhelper/autoscripts/postinst-menu
/usr/share/debhelper/autoscripts/postinst-menu-method
/usr/share/debhelper/autoscripts/postinst-modules
/usr/share/debhelper/autoscripts/postinst-systemd-dont-enable
/usr/share/debhelper/autoscripts/postinst-systemd-enable
/usr/share/debhelper/autoscripts/postinst-systemd-restart
/usr/share/debhelper/autoscripts/postinst-systemd-restartnostart
/usr/share/debhelper/autoscripts/postinst-systemd-start
/usr/share/debhelper/autoscripts/postinst-systemd-user-dont-enable
/usr/share/debhelper/autoscripts/postinst-systemd-user-enable
/usr/share/debhelper/autoscripts/postinst-systemd-user-restart
/usr/share/debhelper/autoscripts/postinst-sysusers
/usr/share/debhelper/autoscripts/postinst-ucf
/usr/share/debhelper/autoscripts/postinst-usrlocal
/usr/share/debhelper/autoscripts/postinst-wm
/usr/share/debhelper/autoscripts/postinst-wm-noman
/usr/share/debhelper/autoscripts/postinst-xfonts
/usr/share/debhelper/autoscripts/postrm-debconf
/usr/share/debhelper/autoscripts/postrm-icons
/usr/share/debhelper/autoscripts/postrm-init
/usr/share/debhelper/autoscripts/postrm-menu
/usr/share/debhelper/autoscripts/postrm-menu-method
/usr/share/debhelper/autoscripts/postrm-modules
/usr/share/debhelper/autoscripts/postrm-sgmlcatalog
/usr/share/debhelper/autoscripts/postrm-systemd
/usr/share/debhelper/autoscripts/postrm-systemd-reload-only
/usr/share/debhelper/autoscripts/postrm-systemd-user
/usr/share/debhelper/autoscripts/postrm-systemd-user-reload-only
/usr/share/debhelper/autoscripts/postrm-ucf
/usr/share/debhelper/autoscripts/postrm-xfonts
/usr/share/debhelper/autoscripts/preinst-emacsen
/usr/share/debhelper/autoscripts/preinst-init-chmod
/usr/share/debhelper/autoscripts/preinst-init-stop
/usr/share/debhelper/autoscripts/preinst-systemd-stop
/usr/share/debhelper/autoscripts/prerm-alternatives
/usr/share/debhelper/autoscripts/prerm-emacsen
/usr/share/debhelper/autoscripts/prerm-init
/usr/share/debhelper/autoscripts/prerm-init-norestart
/usr/share/debhelper/autoscripts/prerm-systemd
/usr/share/debhelper/autoscripts/prerm-systemd-restart
/usr/share/debhelper/autoscripts/prerm-systemd-user-stop
/usr/share/debhelper/autoscripts/prerm-usrlocal
/usr/share/debhelper/autoscripts/prerm-wm
/usr/share/doc/packages/debhelper
/usr/share/doc/packages/debhelper/PROGRAMMING.md
/usr/share/doc/packages/debhelper/README
/usr/share/doc/packages/debhelper/SUPPORT-POLICY
/usr/share/doc/packages/debhelper/TODO
/usr/share/doc/packages/debhelper/changelog
/usr/share/doc/packages/debhelper/copyright
/usr/share/doc/packages/debhelper/rules.tiny
/usr/share/man/man1/dh.1.gz
/usr/share/man/man1/dh_assistant.1.gz
/usr/share/man/man1/dh_auto_build.1.gz
/usr/share/man/man1/dh_auto_clean.1.gz
/usr/share/man/man1/dh_auto_configure.1.gz
/usr/share/man/man1/dh_auto_install.1.gz
/usr/share/man/man1/dh_auto_test.1.gz
/usr/share/man/man1/dh_bugfiles.1.gz
/usr/share/man/man1/dh_builddeb.1.gz
/usr/share/man/man1/dh_clean.1.gz
/usr/share/man/man1/dh_compress.1.gz
/usr/share/man/man1/dh_dwz.1.gz
/usr/share/man/man1/dh_fixperms.1.gz
/usr/share/man/man1/dh_gencontrol.1.gz
/usr/share/man/man1/dh_icons.1.gz
/usr/share/man/man1/dh_install.1.gz
/usr/share/man/man1/dh_installalternatives.1.gz
/usr/share/man/man1/dh_installcatalogs.1.gz
/usr/share/man/man1/dh_installchangelogs.1.gz
/usr/share/man/man1/dh_installcron.1.gz
/usr/share/man/man1/dh_installdeb.1.gz
/usr/share/man/man1/dh_installdebconf.1.gz
/usr/share/man/man1/dh_installdirs.1.gz
/usr/share/man/man1/dh_installdocs.1.gz
/usr/share/man/man1/dh_installemacsen.1.gz
/usr/share/man/man1/dh_installexamples.1.gz
/usr/share/man/man1/dh_installgsettings.1.gz
/usr/share/man/man1/dh_installifupdown.1.gz
/usr/share/man/man1/dh_installinfo.1.gz
/usr/share/man/man1/dh_installinit.1.gz
/usr/share/man/man1/dh_installinitramfs.1.gz
/usr/share/man/man1/dh_installlogcheck.1.gz
/usr/share/man/man1/dh_installlogrotate.1.gz
/usr/share/man/man1/dh_installman.1.gz
/usr/share/man/man1/dh_installmanpages.1.gz
/usr/share/man/man1/dh_installmenu.1.gz
/usr/share/man/man1/dh_installmime.1.gz
/usr/share/man/man1/dh_installmodules.1.gz
/usr/share/man/man1/dh_installpam.1.gz
/usr/share/man/man1/dh_installppp.1.gz
/usr/share/man/man1/dh_installsystemd.1.gz
/usr/share/man/man1/dh_installsystemduser.1.gz
/usr/share/man/man1/dh_installsysusers.1.gz
/usr/share/man/man1/dh_installtmpfiles.1.gz
/usr/share/man/man1/dh_installudev.1.gz
/usr/share/man/man1/dh_installwm.1.gz
/usr/share/man/man1/dh_installxfonts.1.gz
/usr/share/man/man1/dh_link.1.gz
/usr/share/man/man1/dh_lintian.1.gz
/usr/share/man/man1/dh_listpackages.1.gz
/usr/share/man/man1/dh_makeshlibs.1.gz
/usr/share/man/man1/dh_md5sums.1.gz
/usr/share/man/man1/dh_missing.1.gz
/usr/share/man/man1/dh_movefiles.1.gz
/usr/share/man/man1/dh_perl.1.gz
/usr/share/man/man1/dh_prep.1.gz
/usr/share/man/man1/dh_shlibdeps.1.gz
/usr/share/man/man1/dh_strip.1.gz
/usr/share/man/man1/dh_systemd_enable.1.gz
/usr/share/man/man1/dh_systemd_start.1.gz
/usr/share/man/man1/dh_testdir.1.gz
/usr/share/man/man1/dh_testroot.1.gz
/usr/share/man/man1/dh_ucf.1.gz
/usr/share/man/man1/dh_update_autotools_config.1.gz
/usr/share/man/man1/dh_usrlocal.1.gz
/usr/share/man/man7/debhelper.7.gz


Generated by rpm2html 1.8.1

Fabrice Bellet, Tue Jul 9 18:05:00 2024