| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: wpa_supplicant | Distribution: SUSE Linux Enterprise 15 |
| Version: 2.10 | Vendor: SUSE LLC <https://www.suse.com/> |
| Release: 150500.1.3 | Build date: Thu May 4 07:44:37 2023 |
| Group: Unspecified | Build host: ibs-arm-5 |
| Size: 6503190 | Source RPM: wpa_supplicant-2.10-150500.1.3.src.rpm |
| Packager: https://www.suse.com/ | |
| Url: https://w1.fi/wpa_supplicant | |
| Summary: WPA supplicant implementation | |
wpa_supplicant is an implementation of the WPA Supplicant component, i.e., the part that runs in the client stations. It implements key negotiation with a WPA Authenticator and it controls the roaming and IEEE 802.11 authentication/association of the wlan driver.
BSD-3-Clause AND GPL-2.0-or-later
* Tue Dec 27 2022 cfamullaconrad@suse.com
- update to 2.10.0: jsc#PED-2904
* SAE changes
- improved protection against side channel attacks
[https://w1.fi/security/2022-1/]
- added support for the hash-to-element mechanism (sae_pwe=1 or
sae_pwe=2); this is currently disabled by default, but will likely
get enabled by default in the future
- fixed PMKSA caching with OKC
- added support for SAE-PK
* EAP-pwd changes
- improved protection against side channel attacks
[https://w1.fi/security/2022-1/]
* fixed P2P provision discovery processing of a specially constructed
invalid frame
[https://w1.fi/security/2021-1/]
* fixed P2P group information processing of a specially constructed
invalid frame
[https://w1.fi/security/2020-2/]
* fixed PMF disconnection protection bypass in AP mode
[https://w1.fi/security/2019-7/]
* added support for using OpenSSL 3.0
* increased the maximum number of EAP message exchanges (mainly to
support cases with very large certificates)
* fixed various issues in experimental support for EAP-TEAP peer
* added support for DPP release 2 (Wi-Fi Device Provisioning Protocol)
* a number of MKA/MACsec fixes and extensions
* added support for SAE (WPA3-Personal) AP mode configuration
* added P2P support for EDMG (IEEE 802.11ay) channels
* fixed EAP-FAST peer with TLS GCM/CCM ciphers
* improved throughput estimation and BSS selection
* dropped support for libnl 1.1
* added support for nl80211 control port for EAPOL frame TX/RX
* fixed OWE key derivation with groups 20 and 21; this breaks backwards
compatibility for these groups while the default group 19 remains
backwards compatible
* added support for Beacon protection
* added support for Extended Key ID for pairwise keys
* removed WEP support from the default build (CONFIG_WEP=y can be used
to enable it, if really needed)
* added a build option to remove TKIP support (CONFIG_NO_TKIP=y)
* added support for Transition Disable mechanism to allow the AP to
automatically disable transition mode to improve security
* extended D-Bus interface
* added support for PASN
* added a file-based backend for external password storage to allow
secret information to be moved away from the main configuration file
without requiring external tools
* added EAP-TLS peer support for TLS 1.3 (disabled by default for now)
* added support for SCS, MSCS, DSCP policy
* changed driver interface selection to default to automatic fallback
to other compiled in options
* a large number of other fixes, cleanup, and extensions
- drop wpa_supplicant-p2p_iname_size.diff, CVE-2021-30004.patch,
CVE-2021-27803.patch, CVE-2021-0326.patch, CVE-2019-16275.patch,
CVE-2022-23303_0001.patch, CVE-2022-23303_0002.patch,
CVE-2022-23303_0003.patch, CVE-2022-23303_0004.patch:
upstream
- drop restore-old-dbus-interface.patch, wicked has been
switching to the new dbus interface in version 0.6.66
- config:
* re-enable CONFIG_WEP
* enable QCA vendor extensions to nl80211
* enable support for Automatic Channel Selection
* enable OCV, security feature that prevents MITM
multi-channel attacks
* enable QCA vendor extensions to nl80211
* enable EAP-EKE
* Support HT overrides
* TLS v1.1 and TLS v1.2
* Fast Session Transfer (FST)
* Automatic Channel Selection
* Multi Band Operation
* Fast Initial Link Setup
* Mesh Networking (IEEE 802.11s)
- Add dbus-Fix-property-DebugShowKeys-and-DebugTimestamp.patch
(bsc#1201219)
- Move the dbus-1 system.d file to /usr (bsc#1200342)
- Added hardening to systemd service(s) (bsc#1181400). Modified:
* wpa_supplicant.service
- drop wpa_supplicant-getrandom.patch : glibc has been updated
so the getrandom() wrapper is now there
- Sync wpa_supplicant.spec with Factory
* Tue May 17 2022 cfamullaconrad@suse.com
- Enable WPA3-Enterprise (SuiteB-192) support.
* Thu Feb 10 2022 cfamullaconrad@suse.com
- Add CVE-2022-23303_0001.patch, CVE-2022-23303_0002.patch,
CVE-2022-23303_0003.patch, CVE-2022-23303_0004.patch
SAE/EAP-pwd side-channel attack update 2
(CVE-2022-23303, CVE-2022-23304, bsc#1194732, bsc#1194733)
* Tue Apr 06 2021 cfamullaconrad@suse.com
- Add CVE-2021-30004.patch -- forging attacks may occur because
AlgorithmIdentifier parameters are mishandled in tls/pkcs1.c and tls/x509v3.c
(bsc#1184348)
* Wed Mar 03 2021 cfamullaconrad@suse.com
- Fix systemd device ready dependencies in wpa_supplicant@.service file.
(see: https://forums.opensuse.org/showthread.php/547186-wpa_supplicant-service-fails-on-boot-succeeds-on-restart?p=2982844#post2982844)
* Sat Feb 27 2021 cfamullaconrad@suse.com
- Add CVE-2021-27803.patch -- P2P provision discovery processing vulnerability
(bsc#1182805)
* Thu Feb 04 2021 cfamullaconrad@suse.com
- Add CVE-2021-0326.patch -- P2P group information processing vulnerability
(bsc#1181777)
* Tue Oct 06 2020 sp1ritCS@protonmail.com
- Add wpa_supplicant-p2p_iname_size.diff -- Limit P2P_DEVICE name to appropriate ifname size
(https://patchwork.ozlabs.org/project/hostap/patch/20200825062902.124600-1-benjamin@sipsolutions.net/)
* Tue Sep 22 2020 cfamullaconrad@suse.com
- Fix spec file for SLE12, use make %{?_smp_mflags} instead of %make_build
* Tue Sep 22 2020 songchuan.kang@suse.com
- Enable SAE support(jsc#SLE-14992).
* Thu Apr 23 2020 cfamullaconrad@suse.com
- Add CVE-2019-16275.patch -- AP mode PMF disconnection protection bypass
(bsc#1150934)
* Fri Apr 17 2020 bwiedemann@suse.com
- Add restore-old-dbus-interface.patch to fix wicked wlan (boo#1156920)
- Restore fi.epitest.hostap.WPASupplicant.service (bsc#1167331)
* Thu Mar 26 2020 cfamullaconrad@suse.com
- With v2.9 fi.epitest.hostap.WPASupplicant.service is obsolete (bsc#1167331)
* Thu Mar 26 2020 ilya@ilya.pp.ua
- Change wpa_supplicant.service to ensure wpa_supplicant gets started before
network. Fix WLAN config on boot with wicked. (boo#1166933)
* Fri Feb 28 2020 tchvatal@suse.com
- Adjust the service to start after network.target wrt bsc#1165266
* Mon Nov 04 2019 tchvatal@suse.com
- Update to 2.9 release:
* SAE changes
- disable use of groups using Brainpool curves
- improved protection against side channel attacks
[https://w1.fi/security/2019-6/]
* EAP-pwd changes
- disable use of groups using Brainpool curves
- allow the set of groups to be configured (eap_pwd_groups)
- improved protection against side channel attacks
[https://w1.fi/security/2019-6/]
* fixed FT-EAP initial mobility domain association using PMKSA caching
(disabled by default for backwards compatibility; can be enabled
with ft_eap_pmksa_caching=1)
* fixed a regression in OpenSSL 1.1+ engine loading
* added validation of RSNE in (Re)Association Response frames
* fixed DPP bootstrapping URI parser of channel list
* extended EAP-SIM/AKA fast re-authentication to allow use with FILS
* extended ca_cert_blob to support PEM format
* improved robustness of P2P Action frame scheduling
* added support for EAP-SIM/AKA using anonymous@realm identity
* fixed Hotspot 2.0 credential selection based on roaming consortium
to ignore credentials without a specific EAP method
* added experimental support for EAP-TEAP peer (RFC 7170)
* added experimental support for EAP-TLS peer with TLS v1.3
* fixed a regression in WMM parameter configuration for a TDLS peer
* fixed a regression in operation with drivers that offload 802.1X
4-way handshake
* fixed an ECDH operation corner case with OpenSSL
* SAE changes
- added support for SAE Password Identifier
- changed default configuration to enable only groups 19, 20, 21
(i.e., disable groups 25 and 26) and disable all unsuitable groups
completely based on REVmd changes
- do not regenerate PWE unnecessarily when the AP uses the
anti-clogging token mechanisms
- fixed some association cases where both SAE and FT-SAE were enabled
on both the station and the selected AP
- started to prefer FT-SAE over SAE AKM if both are enabled
- started to prefer FT-SAE over FT-PSK if both are enabled
- fixed FT-SAE when SAE PMKSA caching is used
- reject use of unsuitable groups based on new implementation guidance
in REVmd (allow only FFC groups with prime >= 3072 bits and ECC
groups with prime >= 256)
- minimize timing and memory use differences in PWE derivation
[https://w1.fi/security/2019-1/] (CVE-2019-9494, bsc#1131868)
* EAP-pwd changes
- minimize timing and memory use differences in PWE derivation
[https://w1.fi/security/2019-2/] (CVE-2019-9495, bsc#1131870)
- verify server scalar/element
[https://w1.fi/security/2019-4/] (CVE-2019-9497, CVE-2019-9498,
CVE-2019-9499, bsc#1131874, bsc#1131872, bsc#1131871, bsc#1131644)
- fix message reassembly issue with unexpected fragment
[https://w1.fi/security/2019-5/] (CVE-2019-11555, bsc#1133640)
- enforce rand,mask generation rules more strictly
- fix a memory leak in PWE derivation
- disallow ECC groups with a prime under 256 bits (groups 25, 26, and
27)
- SAE/EAP-pwd side-channel attack update
[https://w1.fi/security/2019-6/] (CVE-2019-13377, bsc#1144443)
* fixed CONFIG_IEEE80211R=y (FT) build without CONFIG_FILS=y
* Hotspot 2.0 changes
- do not indicate release number that is higher than the one
AP supports
- added support for release number 3
- enable PMF automatically for network profiles created from
credentials
* fixed OWE network profile saving
* fixed DPP network profile saving
* added support for RSN operating channel validation
(CONFIG_OCV=y and network profile parameter ocv=1)
* added Multi-AP backhaul STA support
* fixed build with LibreSSL
* number of MKA/MACsec fixes and extensions
* extended domain_match and domain_suffix_match to allow list of values
* fixed dNSName matching in domain_match and domain_suffix_match when
using wolfSSL
* started to prefer FT-EAP-SHA384 over WPA-EAP-SUITE-B-192 AKM if both
are enabled
* extended nl80211 Connect and external authentication to support
SAE, FT-SAE, FT-EAP-SHA384
* fixed KEK2 derivation for FILS+FT
* extended client_cert file to allow loading of a chain of PEM
encoded certificates
* extended beacon reporting functionality
* extended D-Bus interface with number of new properties
* fixed a regression in FT-over-DS with mac80211-based drivers
* OpenSSL: allow systemwide policies to be overridden
* extended driver flags indication for separate 802.1X and PSK
4-way handshake offload capability
* added support for random P2P Device/Interface Address use
* extended PEAP to derive EMSK to enable use with ERP/FILS
* extended WPS to allow SAE configuration to be added automatically
for PSK (wps_cred_add_sae=1)
* removed support for the old D-Bus interface (CONFIG_CTRL_IFACE_DBUS)
* extended domain_match and domain_suffix_match to allow list of values
* added a RSN workaround for misbehaving PMF APs that advertise
IGTK/BIP KeyID using incorrect byte order
* fixed PTK rekeying with FILS and FT
* fixed WPA packet number reuse with replayed messages and key
reinstallation
[https://w1.fi/security/2017-1/] (CVE-2017-13077, CVE-2017-13078,
CVE-2017-13079, CVE-2017-13080, CVE-2017-13081, CVE-2017-13082,
CVE-2017-13086, CVE-2017-13087, CVE-2017-13088)
* fixed unauthenticated EAPOL-Key decryption in wpa_supplicant
[https://w1.fi/security/2018-1/] (CVE-2018-14526)
* added support for FILS (IEEE 802.11ai) shared key authentication
* added support for OWE (Opportunistic Wireless Encryption, RFC 8110;
and transition mode defined by WFA)
* added support for DPP (Wi-Fi Device Provisioning Protocol)
* added support for RSA 3k key case with Suite B 192-bit level
* fixed Suite B PMKSA caching not to update PMKID during each 4-way
handshake
* fixed EAP-pwd pre-processing with PasswordHashHash
* added EAP-pwd client support for salted passwords
* fixed a regression in TDLS prohibited bit validation
* started to use estimated throughput to avoid undesired signal
strength based roaming decision
* MACsec/MKA:
- new macsec_linux driver interface support for the Linux
kernel macsec module
- number of fixes and extensions
* added support for external persistent storage of PMKSA cache
(PMKSA_GET/PMKSA_ADD control interface commands; and
MESH_PMKSA_GET/MESH_PMKSA_SET for the mesh case)
* fixed mesh channel configuration pri/sec switch case
* added support for beacon report
* large number of other fixes, cleanup, and extensions
* added support for randomizing local address for GAS queries
(gas_rand_mac_addr parameter)
* fixed EAP-SIM/AKA/AKA' ext auth cases within TLS tunnel
* added option for using random WPS UUID (auto_uuid=1)
* added SHA256-hash support for OCSP certificate matching
* fixed EAP-AKA' to add AT_KDF into Synchronization-Failure
* fixed a regression in RSN pre-authentication candidate selection
* added option to configure allowed group management cipher suites
(group_mgmt network profile parameter)
* removed all PeerKey functionality
* fixed nl80211 AP and mesh mode configuration regression with
Linux 4.15 and newer
* added ap_isolate configuration option for AP mode
* added support for nl80211 to offload 4-way handshake into the driver
* added support for using wolfSSL cryptographic library
* SAE
- added support for configuring SAE password separately of the
WPA2 PSK/passphrase
- fixed PTK and EAPOL-Key integrity and key-wrap algorithm selection
for SAE;
note: this is not backwards compatible, i.e., both the AP and
station side implementations will need to be update at the same
time to maintain interoperability
- added support for Password Identifier
- fixed FT-SAE PMKID matching
* Hotspot 2.0
- added support for fetching of Operator Icon Metadata ANQP-element
- added support for Roaming Consortium Selection element
- added support for Terms and Conditions
- added support for OSEN connection in a shared RSN BSS
- added support for fetching Venue URL information
* added support for using OpenSSL 1.1.1
* FT
- disabled PMKSA caching with FT since it is not fully functional
- added support for SHA384 based AKM
- added support for BIP ciphers BIP-CMAC-256, BIP-GMAC-128,
BIP-GMAC-256 in addition to previously supported BIP-CMAC-128
- fixed additional IE inclusion in Reassociation Request frame when
using FT protocol
- Drop merged patches:
* rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch
* rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch
* rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch
* rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch
* rebased-v2.6-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch
* rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch
* rebased-v2.6-0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch
* rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch
* rebased-v2.6-0009-WPA-Ignore-unauthenticated-encrypted-EAPOL-Key-data.patch
* wpa_supplicant-bnc-1099835-fix-private-key-password.patch
* wpa_supplicant-bnc-1099835-clear-default_passwd_cb.patch
* wpa_supplicant-log-file-permission.patch
* wpa_supplicant-log-file-cloexec.patch
* wpa_supplicant-git-fa67debf4c6ddbc881a212b175faa6d5d0d90c8c.patch
* wpa_supplicant-git-f5b74b966c942feb95a8ddbb7d130540b15b796d.patch
- Rebase patches:
* wpa_supplicant-getrandom.patch
* Mon Jul 29 2019 ilya@ilya.pp.ua
- Refresh spec-file via spec-cleaner and manual optimizations.
* Change URL and Source0 to actual project homepage.
* Remove macro %{?systemd_requires} and rm (not needed).
* Add %autopatch macro.
* Add %make_build macro.
- Chenged patch wpa_supplicant-flush-debug-output.patch (to -p1).
- Changed service-files for start after network (systemd-networkd).
* Fri Nov 02 2018 ilya@ilya.pp.ua
- Refresh spec-file: add %license tag.
* Tue Oct 16 2018 kbabioch@suse.com
- Renamed patches:
- wpa-supplicant-log-file-permission.patch -> wpa_supplicant-log-file-permission.patch
- wpa-supplicant-log-file-cloexec.patch -> wpa_supplicant-log-file-cloexec.patch
- wpa_supplicant-log-file-permission.patch: Using O_WRONLY flag
- Enabled timestamps in log files (bsc#1080798)
* Mon Oct 15 2018 ro@suse.de
- compile eapol_test binary to allow testing via radius proxy and server
(note: this does not match CONFIG_EAPOL_TEST which sets -Werror
and activates an assert call inside the code of wpa_supplicant)
(bsc#1111873), (fate#326725)
- add patch to fix wrong operator precedence in ieee802_11.c
wpa_supplicant-git-fa67debf4c6ddbc881a212b175faa6d5d0d90c8c.patch
- add patch to avoid redefinition of __bitwise macro
wpa_supplicant-git-f5b74b966c942feb95a8ddbb7d130540b15b796d.patch
* Fri Oct 12 2018 kbabioch@suse.com
- Added wpa-supplicant-log-file-permission.patch: Fixes the default file
permissions of the debug log file to more sane values, i.e. it is no longer
world-readable (bsc#1098854).
- Added wpa-supplicant-log-file-cloexec.patch: Open the debug log file with
O_CLOEXEC, which will prevent file descriptor leaking to child processes
(bsc#1098854).
* Thu Oct 11 2018 kbabioch@suse.com
- Added rebased-v2.6-0009-WPA-Ignore-unauthenticated-encrypted-EAPOL-Key-data.patch:
Ignore unauthenticated encrypted EAPOL-Key data (CVE-2018-14526, bsc#1104205).
* Fri Sep 21 2018 kbabioch@suse.com
- Enabled PWD as EAP method. This allows for password-based authentication,
which is easier to setup than most of the other methods, and is used by the
Eduroam network (bsc#1109209).
* Fri Jul 20 2018 ro@suse.de
- add two patches from upstream to fix reading private key
passwords from the configuration file (bsc#1099835)
- add patch for git 89971d8b1e328a2f79699c953625d1671fd40384
wpa_supplicant-bnc-1099835-clear-default_passwd_cb.patch
- add patch for git f665c93e1d28fbab3d9127a8c3985cc32940824f
wpa_supplicant-bnc-1099835-fix-private-key-password.patch
* Mon Oct 16 2017 meissner@suse.com
- Fix KRACK attacks (bsc#1056061, CVE-2017-13078, CVE-2017-13079, CVE-2017-13080, CVE-2017-13081, CVE-2017-13087, CVE-2017-13088):
- rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch
- rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch
- rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch
- rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch
- rebased-v2.6-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch
- rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch
- rebased-v2.6-0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch
- rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch
* Fri Apr 21 2017 obs@botter.cc
- fix wpa_supplicant-sigusr1-changes-debuglevel.patch to match
eloop_signal_handler type (needed to build eapol_test via config)
* Fri Dec 23 2016 dwaas@suse.com
- Added .service files that accept interfaces as %i arguments so it's possible
to call the daemon with:
"systemctl start wpa_supplicant@$INTERFACE_NAME.service"
(like openvpn for example)
* Thu Oct 06 2016 meissner@suse.com
- updated to 2.6 / 2016-10-02
* fixed WNM Sleep Mode processing when PMF is not enabled
[http://w1.fi/security/2015-6/] (CVE-2015-5310 bsc#952254)
* fixed EAP-pwd last fragment validation
[http://w1.fi/security/2015-7/] (CVE-2015-5315 bsc#953115)
* fixed EAP-pwd unexpected Confirm message processing
[http://w1.fi/security/2015-8/] (CVE-2015-5316 bsc#953115)
* fixed WPS configuration update vulnerability with malformed passphrase
[http://w1.fi/security/2016-1/] (CVE-2016-4476 bsc#978172)
* fixed configuration update vulnerability with malformed parameters set
over the local control interface
[http://w1.fi/security/2016-1/] (CVE-2016-4477 bsc#978175)
* fixed TK configuration to the driver in EAPOL-Key 3/4 retry case
* extended channel switch support for P2P GO
* started to throttle control interface event message bursts to avoid
issues with monitor sockets running out of buffer space
* mesh mode fixes/improvements
- generate proper AID for peer
- enable WMM by default
- add VHT support
- fix PMKID derivation
- improve robustness on various exchanges
- fix peer link counting in reconnect case
- improve mesh joining behavior
- allow DTIM period to be configured
- allow HT to be disabled (disable_ht=1)
- add MESH_PEER_ADD and MESH_PEER_REMOVE commands
- add support for PMKSA caching
- add minimal support for SAE group negotiation
- allow pairwise/group cipher to be configured in the network profile
- use ieee80211w profile parameter to enable/disable PMF and derive
a separate TX IGTK if PMF is enabled instead of using MGTK
incorrectly
- fix AEK and MTK derivation
- remove GTKdata and IGTKdata from Mesh Peering Confirm/Close
- note: these changes are not fully backwards compatible for secure
(RSN) mesh network
* fixed PMKID derivation with SAE
* added support for requesting and fetching arbitrary ANQP-elements
without internal support in wpa_supplicant for the specific element
(anqp[265]=<hexdump> in "BSS <BSSID>" command output)
* P2P
- filter control characters in group client device names to be
consistent with other P2P peer cases
- support VHT 80+80 MHz and 160 MHz
- indicate group completion in P2P Client role after data association
instead of already after the WPS provisioning step
- improve group-join operation to use SSID, if known, to filter BSS
entries
- added optional ssid=<hexdump> argument to P2P_CONNECT for join case
- added P2P_GROUP_MEMBER command to fetch client interface address
* P2PS
- fix follow-on PD Response behavior
- fix PD Response generation for unknown peer
- fix persistent group reporting
- add channel policy to PD Request
- add group SSID to the P2PS-PROV-DONE event
- allow "P2P_CONNECT <addr> p2ps" to be used without specifying the
default PIN
* BoringSSL
- support for OCSP stapling
- support building of h20-osu-client
* D-Bus
- add ExpectDisconnect()
- add global config parameters as properties
- add SaveConfig()
- add VendorElemAdd(), VendorElemGet(), VendorElemRem()
* fixed Suite B 192-bit AKM to use proper PMK length
(note: this makes old releases incompatible with the fixed behavior)
* improved PMF behavior for cases where the AP and STA has different
configuration by not trying to connect in some corner cases where the
connection cannot succeed
* added option to reopen debug log (e.g., to rotate the file) upon
receipt of SIGHUP signal
* EAP-pwd: added support for Brainpool Elliptic Curves
(with OpenSSL 1.0.2 and newer)
* fixed EAPOL reauthentication after FT protocol run
* fixed FTIE generation for 4-way handshake after FT protocol run
* extended INTERFACE_ADD command to allow certain type (sta/ap)
interface to be created
* fixed and improved various FST operations
* added 80+80 MHz and 160 MHz VHT support for IBSS/mesh
* fixed SIGNAL_POLL in IBSS and mesh cases
* added an option to abort an ongoing scan (used to speed up connection
and can also be done with the new ABORT_SCAN command)
* TLS client
- do not verify CA certificates when ca_cert is not specified
- support validating server certificate hash
- support SHA384 and SHA512 hashes
- add signature_algorithms extension into ClientHello
- support TLS v1.2 signature algorithm with SHA384 and SHA512
- support server certificate probing
- allow specific TLS versions to be disabled with phase2 parameter
- support extKeyUsage
- support PKCS #5 v2.0 PBES2
- support PKCS #5 with PKCS #12 style key decryption
- minimal support for PKCS #12
- support OCSP stapling (including ocsp_multi)
* OpenSSL
- support OpenSSL 1.1 API changes
- drop support for OpenSSL 0.9.8
- drop support for OpenSSL 1.0.0
* added support for multiple schedule scan plans (sched_scan_plans)
* added support for external server certificate chain validation
(tls_ext_cert_check=1 in the network profile phase1 parameter)
* made phase2 parser more strict about correct use of auth=<val> and
autheap=<val> values
* improved GAS offchannel operations with comeback request
* added SIGNAL_MONITOR command to request signal strength monitoring
events
* added command for retrieving HS 2.0 icons with in-memory storage
(REQ_HS20_ICON, GET_HS20_ICON, DEL_HS20_ICON commands and
RX-HS20-ICON event)
* enabled ACS support for AP mode operations with wpa_supplicant
* EAP-PEAP: fixed interoperability issue with Windows 2012r2 server
("Invalid Compound_MAC in cryptobinding TLV")
* EAP-TTLS: fixed success after fragmented final Phase 2 message
* VHT: added interoperability workaround for 80+80 and 160 MHz channels
* WNM: workaround for broken AP operating class behavior
* added kqueue(2) support for eloop (CONFIG_ELOOP_KQUEUE)
* nl80211:
- add support for full station state operations
- do not add NL80211_ATTR_SMPS_MODE attribute if HT is disabled
- add NL80211_ATTR_PREV_BSSID with Connect command
- fix IEEE 802.1X/WEP EAP reauthentication and rekeying to use
unencrypted EAPOL frames
* added initial MBO support; number of extensions to WNM BSS Transition
Management
* added support for PBSS/PCP and P2P on 60 GHz
* Interworking: add credential realm to EAP-TLS identity
* fixed EAPOL-Key Request Secure bit to be 1 if PTK is set
* HS 2.0: add support for configuring frame filters
* added POLL_STA command to check connectivity in AP mode
* added initial functionality for location related operations
* started to ignore pmf=1/2 parameter for non-RSN networks
* added wps_disabled=1 network profile parameter to allow AP mode to
be started without enabling WPS
* wpa_cli: added action script support for AP-ENABLED and AP-DISABLED
events
* improved Public Action frame addressing
- add gas_address3 configuration parameter to control Address 3
behavior
* number of small fixes
- wpa_supplicant-dump-certificate-as-PEM-in-debug-mode.diff: dump x509
certificates from remote radius server in debug mode in WPA-EAP.
* Wed Jul 20 2016 tchvatal@suse.com
- Remove support for <12.3 as we are unresolvable there anyway
- Use qt5 on 13.2 if someone pulls this package in
- Convert to pkgconfig dependencies over the devel pkgs
- Use the %qmake5 macro to build the qt5 gui
* Wed Mar 23 2016 lnussel@suse.de
- add After=dbus.service to prevent too early shutdown (bnc#963652)
* Fri Feb 26 2016 crrodriguez@opensuse.org
- Revert CONFIG_ELOOP_EPOLL=y, it is broken in combination
with CONFIG_DBUS=yes.
* Sat Feb 20 2016 crrodriguez@opensuse.org
- spec: Compile the GUI against QT5 in 13.2 and later.
* Thu Feb 18 2016 crrodriguez@opensuse.org
- Previous update did not include version 2.5 tarball
or changed the version number in spec, only the changelog
and removed patches.
- config: set CONFIG_NO_RANDOM_POOL=y, we have a reliable·
random number generator by using /dev/urandom, no need to
keep an internal random number pool which draws entropy from
/dev/random.
- config: prefer using epoll(7) instead of select(2)
by setting CONFIG_ELOOP_EPOLL=y
- wpa_supplicant-getrandom.patch: Prefer to use the getrandom(2)
system call to collect entropy. if it is not present disable
buffering when reading /dev/urandom, otherwise each os_get_random()
call will request BUFSIZ of entropy instead of the few needed bytes.
* Wed Feb 17 2016 lnussel@suse.de
- add aliases for both provided dbus names to avoid systemd stopping the
service when switching runlevels (boo#966535)
* Thu Feb 04 2016 michael@stroeder.com
- removed obsolete security patches:
* 0001-P2P-Validate-SSID-element-length-before-copying-it-C.patch
* 0001-WPS-Fix-HTTP-chunked-transfer-encoding-parser.patch
* 0001-AP-WMM-Fix-integer-underflow-in-WMM-Action-frame-par.patch
* 0001-EAP-pwd-peer-Fix-payload-length-validation-for-Commi.patch
* wpa_s-D-Bus-Fix-operations-when-P2P-management-interface-is-used.patch
* 0002-EAP-pwd-server-Fix-payload-length-validation-for-Com.patch
* 0003-EAP-pwd-peer-Fix-Total-Length-parsing-for-fragment-r.patch
* 0004-EAP-pwd-server-Fix-Total-Length-parsing-for-fragment.patch
* 0005-EAP-pwd-peer-Fix-asymmetric-fragmentation-behavior.patch
- Update to upstream release 2.5
* fixed P2P validation of SSID element length before copying it
[http://w1.fi/security/2015-1/] (CVE-2015-1863)
* fixed WPS UPnP vulnerability with HTTP chunked transfer encoding
[http://w1.fi/security/2015-2/] (CVE-2015-4141)
* fixed WMM Action frame parser (AP mode)
[http://w1.fi/security/2015-3/] (CVE-2015-4142)
* fixed EAP-pwd peer missing payload length validation
[http://w1.fi/security/2015-4/]
(CVE-2015-4143, CVE-2015-4144, CVE-2015-4145, CVE-2015-4146)
* fixed validation of WPS and P2P NFC NDEF record payload length
[http://w1.fi/security/2015-5/] (CVE-2015-8041)
* nl80211:
- added VHT configuration for IBSS
- fixed vendor command handling to check OUI properly
- allow driver-based roaming to change ESS
* added AVG_BEACON_RSSI to SIGNAL_POLL output
* wpa_cli: added tab completion for number of commands
* removed unmaintained and not yet completed SChannel/CryptoAPI support
* modified Extended Capabilities element use in Probe Request frames to
include all cases if any of the values are non-zero
* added support for dynamically creating/removing a virtual interface
with interface_add/interface_remove
* added support for hashed password (NtHash) in EAP-pwd peer
* added support for memory-only PSK/passphrase (mem_only_psk=1 and
CTRL-REQ/RSP-PSK_PASSPHRASE)
* P2P
- optimize scan frequencies list when re-joining a persistent group
- fixed number of sequences with nl80211 P2P Device interface
- added operating class 125 for P2P use cases (this allows 5 GHz
channels 161 and 169 to be used if they are enabled in the current
regulatory domain)
- number of fixes to P2PS functionality
- do not allow 40 MHz co-ex PRI/SEC switch to force MCC
- extended support for preferred channel listing
* D-Bus:
- fixed WPS property of fi.w1.wpa_supplicant1.BSS interface
- fixed PresenceRequest to use group interface
- added new signals: FindStopped, WPS pbc-overlap,
GroupFormationFailure, WPS timeout, InvitationReceived
- added new methods: WPS Cancel, P2P Cancel, Reconnect, RemoveClient
- added manufacturer info
* added EAP-EKE peer support for deriving Session-Id
* added wps_priority configuration parameter to set the default priority
for all network profiles added by WPS
* added support to request a scan with specific SSIDs with the SCAN
command (optional "ssid <hexdump>" arguments)
* removed support for WEP40/WEP104 as a group cipher with WPA/WPA2
* fixed SAE group selection in an error case
* modified SAE routines to be more robust and PWE generation to be
stronger against timing attacks
* added support for Brainpool Elliptic Curves with SAE
* added support for CCMP-256 and GCMP-256 as group ciphers with FT
* fixed BSS selection based on estimated throughput
* added option to disable TLSv1.0 with OpenSSL
(phase1="tls_disable_tlsv1_0=1")
* added Fast Session Transfer (FST) module
* fixed OpenSSL PKCS#12 extra certificate handling
* fixed key derivation for Suite B 192-bit AKM (this breaks
compatibility with the earlier version)
* added RSN IE to Mesh Peering Open/Confirm frames
* number of small fixes
* Thu May 07 2015 ro@suse.de
- added patch for bnc#930077 CVE-2015-4141
0001-AP-WMM-Fix-integer-underflow-in-WMM-Action-frame-par.patch
- added patch for bnc#930078 CVE-2015-4142
0001-WPS-Fix-HTTP-chunked-transfer-encoding-parser.patch
- added patches for bnc#930079 CVE-2015-4143
0001-EAP-pwd-peer-Fix-payload-length-validation-for-Commi.patch
0002-EAP-pwd-server-Fix-payload-length-validation-for-Com.patch
0003-EAP-pwd-peer-Fix-Total-Length-parsing-for-fragment-r.patch
0004-EAP-pwd-server-Fix-Total-Length-parsing-for-fragment.patch
0005-EAP-pwd-peer-Fix-asymmetric-fragmentation-behavior.patch
* Fri May 01 2015 zaitor@opensuse.org
- Add wpa_s-D-Bus-Fix-operations-when-P2P-management-interface-is-used.patch
Fix Segmentation fault in wpa_supplicant. Patch taken from
upstream master git (arch#44740).
* Thu Apr 23 2015 crrodriguez@opensuse.org
- 0001-P2P-Validate-SSID-element-length-before-copying-it-C.patch
Fix CVE-2015-1863, memcpy overflow.
- wpa_supplicant-alloc_size.patch: annotate two wrappers
with attribute alloc_size, which may help warning us of
bugs such as the above.
* Fri Apr 10 2015 stefan.bruens@rwth-aachen.de
- Delete wpa_priv and eapol_test man pages, these are disabled in config
- Move wpa_gui man page to gui package
* Thu Apr 02 2015 stefan.bruens@rwth-aachen.de
- Update to 2.4
* allow OpenSSL cipher configuration to be set for internal EAP server
(openssl_ciphers parameter)
* fixed number of small issues based on hwsim test case failures and
static analyzer reports
* P2P:
- add new=<0/1> flag to P2P-DEVICE-FOUND events
- add passive channels in invitation response from P2P Client
- enable nl80211 P2P_DEVICE support by default
- fix regresssion in disallow_freq preventing search on social
channels
- fix regressions in P2P SD query processing
- try to re-invite with social operating channel if no common channels
in invitation
- allow cross connection on parent interface (this fixes number of
use cases with nl80211)
- add support for P2P services (P2PS)
- add p2p_go_ctwindow configuration parameter to allow GO CTWindow to
be configured
* increase postponing of EAPOL-Start by one second with AP/GO that
supports WPS 2.0 (this makes it less likely to trigger extra roundtrip
of identity frames)
* add support for PMKSA caching with SAE
* add support for control mesh BSS (IEEE 802.11s) operations
* fixed number of issues with D-Bus P2P commands
* fixed regression in ap_scan=2 special case for WPS
* fixed macsec_validate configuration
* add a workaround for incorrectly behaving APs that try to use
EAPOL-Key descriptor version 3 when the station supports PMF even if
PMF is not enabled on the AP
* allow TLS v1.1 and v1.2 to be negotiated by default; previous behavior
of disabling these can be configured to work around issues with broken
servers with phase1="tls_disable_tlsv1_1=1 tls_disable_tlsv1_2=1"
* add support for Suite B (128-bit and 192-bit level) key management and
cipher suites
* add WMM-AC support (WMM_AC_ADDTS/WMM_AC_DELTS)
* improved BSS Transition Management processing
* add support for neighbor report
* add support for link measurement
* fixed expiration of BSS entry with all-zeros BSSID
* add optional LAST_ID=x argument to LIST_NETWORK to allow all
configured networks to be listed even with huge number of network
profiles
* add support for EAP Re-Authentication Protocol (ERP)
* fixed EAP-IKEv2 fragmentation reassembly
* improved PKCS#11 configuration for OpenSSL
* set stdout to be line-buffered
* add TDLS channel switch configuration
* add support for MAC address randomization in scans with nl80211
* enable HT for IBSS if supported by the driver
* add BSSID black and white lists (bssid_blacklist, bssid_whitelist)
* add support for domain_suffix_match with GnuTLS
* add OCSP stapling client support with GnuTLS
* include peer certificate in EAP events even without a separate probe
operation; old behavior can be restored with cert_in_cb=0
* add peer ceritficate alt subject name to EAP events
(CTRL-EVENT-EAP-PEER-ALT)
* add domain_match network profile parameter (similar to
domain_suffix_match, but full match is required)
* enable AP/GO mode HT Tx STBC automatically based on driver support
* add ANQP-QUERY-DONE event to provide information on ANQP parsing
status
* allow passive scanning to be forced with passive_scan=1
* add a workaround for Linux packet socket behavior when interface is in
bridge
* increase 5 GHz band preference in BSS selection (estimate SNR, if info
not available from driver; estimate maximum throughput based on common
HT/VHT/specific TX rate support)
* add INTERWORKING_ADD_NETWORK ctrl_iface command; this can be used to
implement Interworking network selection behavior in upper layers
software components
* add optional reassoc_same_bss_optim=1 (disabled by default)
optimization to avoid unnecessary Authentication frame exchange
* extend TDLS frame padding workaround to cover all packets
* allow wpa_supplicant to recover nl80211 functionality if the cfg80211
module gets removed and reloaded without restarting wpa_supplicant
* allow hostapd DFS implementation to be used in wpa_supplicant AP mode
* Sat Oct 18 2014 stefan.bruens@rwth-aachen.de
- Update to 2.3
* fixed number of minor issues identified in static analyzer warnings
* fixed wfd_dev_info to be more careful and not read beyond the buffer
when parsing invalid information for P2P-DEVICE-FOUND
* extended P2P and GAS query operations to support drivers that have
maximum remain-on-channel time below 1000 ms (500 ms is the current
minimum supported value)
* added p2p_search_delay parameter to make the default p2p_find delay
configurable
* improved P2P operating channel selection for various multi-channel
concurrency cases
* fixed some TDLS failure cases to clean up driver state
* fixed dynamic interface addition cases with nl80211 to avoid adding
ifindex values to incorrect interface to skip foreign interface events
properly
* added TDLS workaround for some APs that may add extra data to the
end of a short frame
* fixed EAP-AKA' message parser with multiple AT_KDF attributes
* added configuration option (p2p_passphrase_len) to allow longer
passphrases to be generated for P2P groups
* fixed IBSS channel configuration in some corner cases
* improved HT/VHT/QoS parameter setup for TDLS
* modified D-Bus interface for P2P peers/groups
* started to use constant time comparison for various password and hash
values to reduce possibility of any externally measurable timing
differences
* extended explicit clearing of freed memory and expired keys to avoid
keeping private data in memory longer than necessary
* added optional scan_id parameter to the SCAN command to allow manual
scan requests for active scans for specific configured SSIDs
* fixed CTRL-EVENT-REGDOM-CHANGE event init parameter value
* added option to set Hotspot 2.0 Rel 2 update_identifier in network
configuration to support external configuration
* modified Android PNO functionality to send Probe Request frames only
for hidden SSIDs (based on scan_ssid=1)
* added generic mechanism for adding vendor elements into frames at
runtime (VENDOR_ELEM_ADD, VENDOR_ELEM_GET, VENDOR_ELEM_REMOVE)
* added fields to show unrecognized vendor elements in P2P_PEER
* removed EAP-TTLS/MSCHAPv2 interoperability workaround so that
MS-CHAP2-Success is required to be present regardless of
eap_workaround configuration
* modified EAP fast session resumption to allow results to be used only
with the same network block that generated them
* extended freq_list configuration to apply for sched_scan as well as
normal scan
* modified WPS to merge mixed-WPA/WPA2 credentials from a single session
* fixed nl80211/RTM_DELLINK processing when a P2P GO interface is
removed from a bridge
* fixed number of small P2P issues to make negotiations more robust in
corner cases
* added experimental support for using temporary, random local MAC
address (mac_addr and preassoc_mac_addr parameters); this is disabled
by default (i.e., previous behavior of using permanent address is
maintained if configuration is not changed)
* added D-Bus interface for setting/clearing WFD IEs
* fixed TDLS AID configuration for VHT
* modified -m<conf> configuration file to be used only for the P2P
non-netdev management device and do not load this for the default
station interface or load the station interface configuration for
the P2P management interface
* fixed external MAC address changes while wpa_supplicant is running
* started to enable HT (if supported by the driver) for IBSS
* fixed wpa_cli action script execution to use more robust mechanism
(CVE-2014-3686)
/etc/logrotate.d/wpa_supplicant /etc/wpa_supplicant /etc/wpa_supplicant/wpa_supplicant.conf /run/wpa_supplicant /usr/lib/systemd/system/dbus-fi.epitest.hostap.WPASupplicant.service /usr/lib/systemd/system/dbus-fi.w1.wpa_supplicant1.service /usr/lib/systemd/system/wpa_supplicant.service /usr/lib/systemd/system/wpa_supplicant@.service /usr/sbin/eapol_test /usr/sbin/rcwpa_supplicant /usr/sbin/wpa_cli /usr/sbin/wpa_passphrase /usr/sbin/wpa_supplicant /usr/share/dbus-1/system-services /usr/share/dbus-1/system-services/fi.epitest.hostap.WPASupplicant.service /usr/share/dbus-1/system-services/fi.w1.wpa_supplicant1.service /usr/share/dbus-1/system.d/wpa_supplicant.conf /usr/share/doc/packages/wpa_supplicant /usr/share/doc/packages/wpa_supplicant/ChangeLog /usr/share/doc/packages/wpa_supplicant/README /usr/share/doc/packages/wpa_supplicant/examples /usr/share/doc/packages/wpa_supplicant/examples/60_wpa_supplicant /usr/share/doc/packages/wpa_supplicant/examples/dbus-listen-preq.py /usr/share/doc/packages/wpa_supplicant/examples/dpp-nfc.py /usr/share/doc/packages/wpa_supplicant/examples/dpp-qrcode.py /usr/share/doc/packages/wpa_supplicant/examples/ieee8021x.conf /usr/share/doc/packages/wpa_supplicant/examples/openCryptoki.conf /usr/share/doc/packages/wpa_supplicant/examples/p2p /usr/share/doc/packages/wpa_supplicant/examples/p2p-action-udhcp.sh /usr/share/doc/packages/wpa_supplicant/examples/p2p-action.sh /usr/share/doc/packages/wpa_supplicant/examples/p2p-nfc.py /usr/share/doc/packages/wpa_supplicant/examples/p2p/p2p_connect.py /usr/share/doc/packages/wpa_supplicant/examples/p2p/p2p_disconnect.py /usr/share/doc/packages/wpa_supplicant/examples/p2p/p2p_find.py /usr/share/doc/packages/wpa_supplicant/examples/p2p/p2p_flush.py /usr/share/doc/packages/wpa_supplicant/examples/p2p/p2p_group_add.py /usr/share/doc/packages/wpa_supplicant/examples/p2p/p2p_invite.py /usr/share/doc/packages/wpa_supplicant/examples/p2p/p2p_listen.py /usr/share/doc/packages/wpa_supplicant/examples/p2p/p2p_stop_find.py /usr/share/doc/packages/wpa_supplicant/examples/plaintext.conf /usr/share/doc/packages/wpa_supplicant/examples/udhcpd-p2p.conf /usr/share/doc/packages/wpa_supplicant/examples/wep.conf /usr/share/doc/packages/wpa_supplicant/examples/wpa-psk-tkip.conf /usr/share/doc/packages/wpa_supplicant/examples/wpa2-eap-ccmp.conf /usr/share/doc/packages/wpa_supplicant/examples/wpas-dbus-new-getall.py /usr/share/doc/packages/wpa_supplicant/examples/wpas-dbus-new-signals.py /usr/share/doc/packages/wpa_supplicant/examples/wpas-dbus-new-wps.py /usr/share/doc/packages/wpa_supplicant/examples/wpas-dbus-new.py /usr/share/doc/packages/wpa_supplicant/examples/wps-ap-cli /usr/share/doc/packages/wpa_supplicant/examples/wps-nfc.py /usr/share/doc/packages/wpa_supplicant/todo.txt /usr/share/doc/packages/wpa_supplicant/wpa_supplicant.conf /usr/share/licenses/wpa_supplicant /usr/share/licenses/wpa_supplicant/COPYING /usr/share/man/man5/wpa_supplicant.conf.5.gz /usr/share/man/man8/eapol_test.8.gz /usr/share/man/man8/wpa_background.8.gz /usr/share/man/man8/wpa_cli.8.gz /usr/share/man/man8/wpa_passphrase.8.gz /usr/share/man/man8/wpa_supplicant.8.gz
Generated by rpm2html 1.8.1
Fabrice Bellet, Tue Jul 9 18:17:49 2024